|
|
|
| Skew Effect Simulation Based on Multi-Slices Model |
| Liang Wenyi, Lu Tianxiong, Zhang Xiang |
| Hangzhou Easitech Corporation Hangzhou 310008 China |
|
|
|
|
Abstract The rotor and stator skew for electrical machines were analysed with 3D FEM software and the calculating works are very large. The problem of skew simulation is considered in EasiMotor software — a FEM software based on multi-slices method. The simulation in Flux 10.3, and the experimental result verifies the validity of the method. The calculated accuracy brought by slice method and the slice number are also discussed in this paper.
|
|
Received: 20 May 2010
Published: 07 March 2014
|
|
|
|
|
|
[1] 江建中, 傅伟农, 斜槽异步电动机的多截面有限元法分析[J]. 电工技术学报, 1997, 12(10)：1-7.
Jian Jianzhong, Fu Weinong. Multi-slice finite element analysis of skewed induction motors[J]. Transactions of China Electrotechnical Society, 1997, 12(10)：1-7.
[2] 胡敏强, 黄学良. 电机运行性能数值计算方法及其应用[M]. 南京: 东南大学出版社, 2003.
[3] Joao Bastos, Nelson Sadowski, Marcel Dekker. Electromagnetic modeling by finite element methords[M]. New York: Marcel Oekker, Inc, 2003.
[4] Jin Jianming. The finite element method in electromagnetics[M]. New York: John Wiley& Sonc, Inc., 2002. |
|
|
|
2011, Vol. 26 
