不同掺杂对可加工陶瓷二次电子发射及沿面闪络特性的影响

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (378 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Secondary electron emission (SEE) yield is one important factor for the flashover phenomena of solid materials under high electric field in vacuum. On the basis of the novel low melting temperature machinable glass ceramics for vacuum insulation system, which has excellent machinable performance and good electrical properties, different low SEE yield metal oxides including Cu₂O and Cr₂O₃ are doped into the original glass ceramics while keeping its machinable performance, to investigate the effects of different process technology on the surface flashover phenomena of the machinable ceramics under pulse voltage in vacuum. The experimental results indicate that after the metal oxide doped into the original material the SEE yield of the sample reduced. By investigating the different samples' flashover voltage it can be seen that with the sample's SEE yield reducing the sample's vacuum flashover voltage increasing.

Key words： Flashover machinable ceramic SEE yield vacuum

Received: 11 August 2009 Published: 07 March 2014

PACS:	TM28
	TM85

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yu Kaikun
	Zhang Guanjun
	Tian Jie
	Zheng Nan
	Huang Xuezeng
	Ma Xinpei
	Li Guangxin
	Yasushi Yamano
	Shinichi Kobayashi

Cite this article:

Yu Kaikun,Zhang Guanjun,Tian Jie等. Effect of Different Dopant in Machinable Ceramic on Its Secondary Electron Emission and Surface Flashover Characteristics in Vacuum[J]. Transactions of China Electrotechnical Society, 2011, 26(1): 23-28.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2011/V26/I1/23

[1] Hawley R. Solid insulators in vacuum: a review[J]. Vacuum, 1968, 18(7): 383-390.
[2] Miller H C. Surface flashover of insulators[J]. IEEE Trans. Electr. Insul., 1989, 24(5): 765-786.
[3] Miller H C. Flashover of insulators in vacuum: review of the phenomena and techniques to improve hold off voltage[J]. IEEE Trans. Electr. Insul., 1993, 28(4): 512-527.
[4] Ma X P, Li G X, Shen L, et al. Ductile-mode material removal of a mica-glass-ceramic [J]. J. Am. Ceram. Soc., 2003, 86: 1040-1042.
[5] 马新沛, 李光新, 沈莲, 等. 一种新型云母玻璃陶瓷的切削行为与显微结构[J]. 无机材料学报, 2004, 19(1): 48-52.
[6] 马新沛, 李光新, 沈莲. 低熔点可切削微晶玻璃的组织与性能[J]. 无机材料学报, 2000, 15(2): 365- 370.
[7] Pillai A S, Hackam R. Surface flashover of solid insulators in atmospheric air and in vacuum[J]. J. Appl. Phys., 1985, 58(1): 146-153.
[8] Habelitz S, Hoche T, Hergt R, et al. Microstructural design through epitaxial growth in extruded mica glass-ceramics[J]. Acta Mater, 1999, 7(9): 2831- 2840.
[9] 张冠军, 赵文彬, 郑楠, 等. 真空中固体绝缘沿面闪络现象的研究进展[J]. 高电压技术, 2007, 33(7): 30-35.
[10] Zhang G J, Zhao W B, Ma X P, et al. Investigation on surface insulation strength of machinable ceramic material under pulsed voltage in vacuum[J]. Journal of the Vacuum Society of Japan, 2007, 50(5): 332-336.
[11] Li C R, Sudarshan T S. Dielectric surface preflashover processes in vacuum[J]. Journal of Applied Physics, 1994, 76(6): 3313-3320.
[12] 于开坤, 张冠军, 郑楠, 等. 表面激光处理对氧化铝陶瓷真空中闪络特性的影响[J]. 电工技术学报, 2009, 24(1): 28-34.
[13] 张冠军, 严璋, 刘源兴, 等. 真空中冲击电压下硅半导体的泄漏电流及沿面闪络特性[J]. 电工技术学报, 2000, 15(5): 53-57.
[14] Yu Kaikun, Zhang Guanjun, Liu Guoqing, et al. Effect of surface shallow traps on flashover characteristics across machinable ceramic in vacuum[J]. IEEE Trans. on Dielectrics and Electrical Insulation, 2008, 15(5): 1464-1470.
[15] 丁立健, 李成榕, 王景春, 等. 真空中绝缘子沿面预闪络现象的研究[J]. 中国电机工程学报, 2001, 21(9)：27-32.
[16] 李成榕, 丁立健, 吕金壮, 等. 氧化铝陶瓷绝缘子真空沿面闪络过程中的陷阱机制[J]. 中国电机工程学报, 2007, 27(9): 1-5.
[17] Anderson R A, Brainard J P. Mechanism of pulsed surface flashover involving electron-stimulated desorption[J]. Journal of Applied Physics, 1980, 51(3): 1414-1421.
[18] Blaise G, Le Gressus C. Charging and flashover induced by surface polarization relaxation process[J]. Journal of Applied Physics, 1991, 69(9): 6334-6339.
[19] Le Gressus C, Blaise G. Breakdown phenomena related to trapping/detrapping processes in wide band gap insulators[J]. IEEE Trans. on Electrical Insulation, 1992, 27(3): 472-481.
[20] Sudarshan T S, Cross J D, Srivastava K D. Prebreakdown processes associated with surface flashover of solid insulators in vacuum[J]. IEEE Trans. on Electrical. Insulation, 1977, 12(3): 200-208.
[21] Suharyanto, Yasushi Yamano, Shinichi Kobayashi, et al. Effect of mechanical finishes on secondary electron emission of Alumina ceramics[J]. IEEE Trans. on Dielectrics and Electrical Insulation, 2007, 14(3): 620-626.