Abstract：The whole machine scheme of the developed crank mechanical servo press is proposed. The dynamic system combination of permanent magnetic synchronous motor(PMSM)and capacitor energy storage device substitutes for the traditional mechanical press’s combination of asynchronous motor and mechanical flywheel-coupling. Analysis and research on capacitor energy storage parameters of the dynamic system are made. The paper describes the working mode of servo press as well as the voltage and current’s changing situation of the capacitor energy storage device during the stamping processing. The heavy servo system model is established under the Matlab environment. Taking a 80t servo press as the goal, the selection of capacitor energy storage parameter is analyzed through the simulation. A group of reasonable energy storage parameters are proposed and a heavy load servo drive system on this prototype is designed also. Combining with crank mechanical servo press, experiments are carried taking the hydraulic accumulator as the load object. The result proved that the servo system can satisfy the request of heavy load driving performance while the slide stamping processing. The capacitor energy storage device designed can not only realize the function of the mechanical flywheel, but slow down the impact of the summit current on power grid. The scheme proposed has the characteristic of high efficiency and high overload which is feasible in the servo press application occasion.
鲁文其, 胡育文, 黄文新, 杜栩扬. 永磁同步电机重载驱动的伺服压力机动力系统电容储能参数[J]. 电工技术学报, 2010, 25(10): 59-65.
Lu Wenqi, Hu Yuwen, Huang Wenxin, Du Xuyang. Analysis on Capacitor Energy Storage Parameters of Servo Press Dynamic System of PMSM With Heavy Load. Transactions of China Electrotechnical Society, 2010, 25(10): 59-65.
[1] 鲁文其, 胡育文, 黄文新. 基于交流电机重载驱动的复合型伺服压力机[J]. 电机与控制应用, 2008, 35 (9): 11-14. [2] 孙友松, 周先辉, 黎勉. 交流伺服压力机及其关键技术[J]. 锻压技术, 2008, 33(4): 1-8. [3] Yossifon S, Shivpuri R. Design considerations for the electric servomotor driven 30 ton double knuckle press for precision forming[J]. International Journal of Machinery Tools Manufacture, 1993(2): 193-208. [4] 何德誉. 曲柄压力机[M]. 北京: 机械工业出版社, 1981. [5] Sjoerd G, Marc S. Design and tests of a hybrid servo drive system for a 1000T mechanical press[C]. Power Electronics Specialists Conference, 2008: 424-429. [6] Sjoerd G, Marc S. New drive concepts reduce power requirements of large servo presses[C]. European Conference on Power Electronics and Applications, 2007: 1-10. [7] Li C H, Tso P L. Experimental study on a hybrid- driven servo press using iterative learning control[J]. International Journal of Machine Tools & Manufact- ure, 2008, 48: 209-219. [8] Tso P L, Li C H, Ke J H. Design of hybrid-driven servo press mechanism[C]. Proceedings of ASME International Mechanical Engineering Congress and Exposition, 2005. [9] 李辉. 混合驱动可控压力机的基础理论研究[D]. 天津: 天津大学, 2003. [10] Fung R F, Chen K W, Yen J Y. Fuzzy sliding mode controlled slider-crank mechanism using a PM synchronous servomotor drive[J]. International Journal of Mechanism Science.1999, 41(3): 337-355. [11] Fan H M, Sun Y, Zhang X b. Research on fractional order controller in servo press control system[C]. International Conference on Mechatronics and Automation, 2007. [12] 刘贤兴, 卜言柱, 胡育文. 基于精确线性化解耦的永磁同步电机空间矢量调制系统[J]. 中国电机工程学报, 2007, 27(30): 56-59.
2010, Vol. 25 
