Abstract：This paper presents the design and electromagnetic analysis of the double stator permanent magnet brushless (DS-PMBL) machine using as power splitting device for hybrid electric vehicles (HEVs). The sizing equation is derived, which lays a foundation for the initial design of the machine. A 2.5kW prototype is designed and built for exemplification. Moreover, 2D finite element analysis (FEA) for the machine is carried out to investigate back EMF, inductance characteristics and cogging torque. Experimental results of the prototype are given to verify the design method and the theoretical analysis, which are helpful on further studying the DS-PMBL machine using for power splitting.
王玉彬, 程明, 樊英, 邹国棠. 功率分配用双定子永磁无刷电机设计与电磁特性分析[J]. 电工技术学报, 2010, 25(10): 37-43.
Wang Yubin, Cheng Ming, Fan Ying, Chau K T. Design and Electromagnetic Performance Analysis of Double StatorPermanent Magnet Brushless Machine for Power Splitting. Transactions of China Electrotechnical Society, 2010, 25(10): 37-43.
[1] Miller J M. Hybrid electric vehicle propulsion system architectures of the e-CVT type[J]. IEEE Transactions on Power Electronics, 2006, 21(3): 756-767. [2] Hoeijmakers M J, Ferreira J A. The electric variable transmission[J]. IEEE Transactions on Industry Applications, 2006, 42(4): 1092-1100. [3] 崔淑梅, 程远, 陈清泉. 先进汽车电气变速器[J]. 电工技术学报, 2006, 21(10): 112-116. [4] 温旭辉, 赵峰, 范涛, 等. 基于双机械端口电机的新型电力无级变速系统研究[J]. 电工技术学报, 2007, 22(7): 24-28. [5] Niu S, Chau K T, Jiang J Z. Analysis of eddy-current loss in a double-stator cup-rotor PM machine[J].IEEE Transactions on Magnetics, 2008, 44(11): 4401- 4404. [6] Niu S, Chau K T. Quantitative comparison of double- stator and traditional permanent magnet brushless machines[J]. Journal on Applied Physics, 2009, 105 (7): 1-3. [7] Niu S, Chau K T, Jiang J Z, et al. Design and control of a new double-stator cup-rotor permanent-magnet machine for wind power generation[J]. IEEE Transactions on Magnetics, 2007, 43(6): 2501-2503. [8] Chai F, Cui S, Cheng S. Performance analysis of double-stator starter generator for the hybrid electric vehicle[J]. IEEE Transactions on Magnetics, 2005, 41 (1): 484-487. [9] Qu Ronghai, Lipo T A. Dual-rotor, radial-flux, toroidally, wound, permanent-magnet machines[J]. IEEE Transactions on Industry Applications, 2003, 39 (6): 1665-1673. [10] Jahns T M, Wen L Soong. Pulsating torque minimi- zation techniques for permanent magnet AC motor drives-a review[J]. IEEE Transactions on Industry Applications, 1996, 43(2): 321-330. [11] Nicola Bianchi, Silverio Bolognani. Design techniques for reducing the cogging torque in surface- mounted PM motors[J]. IEEE Transactions on Indus- try Applications, 2002, 38(5): 1259-1265.
2010, Vol. 25 
