Abstract：With the expansion of wind farm construction in cold regions around the world, more and more attention has been paid to anti-/de-icing technologies used on wind turbine blades. The common ice protection methods for wind turbine blades mainly include super-hydrophobic coating (SHC) anti-icing method and thermal anti-/de-icing methods. However, the hydrophobic property of SHC will be weakened as the number of icing increases and the thermal methods will consume a lot of time and energy with the ambient temperature goes down. Compared with the methods mentioned above, mechanical de-icing method has better de-icing performances with lower energy consumption. Inspired by the airfoil de-icing boot, a new structured pneumatic impulse de-icing method suitable for wind turbine blade is proposed. This method uses the modified epoxy resin to pour the inflatable tube inside the protected structure. By applying an impulse of high pressure gas to produce a rapid impact force, the ice accumulated on the protected structure surface will be crushed and removed. Compared with the de-icing boot used on airfoil, the new structured pneumatic impulse de-icing method has shorter operation time and smaller surface deformation displacement. For identifying the de-icing effects of the new structured pneumatic impulse de-icing method under different icing thicknesses, the dynamic simulation of de-icing process based on the simplified model of this new method was carried out by the commercial software ABAQUS. The simulation adopted inflation pressures include 1 MPa, 1.5 MPa, 2MPa, 2.5 MPa and 3 MPa with the impulse duration is 4 ms. To verify the accuracy of simulation results, the pneumatic impulse de-icing samples were manufactured, and the icing and de-icing tests were carried out in the artificial climate chamber. The icing temperature in the climate chamber is controlled at 5℃, the wind velocity is set at 6 m/s, and the average icing thicknesses mainly include 1 mm, 2 mm and 3 mm. The simulation and tests results show that: (1) With the increase of inflation pressure, the de-icing ratio of sample with 1 mm ice layer shows an increasing trend, and this is caused by the enhancement of transverse shear stress working at the ice/metal interface. (2) When the inflation pressure increases from 1.5 MPa to 3 MPa, the de-icing ratio of sample with 2 mm or 3 mm ice layer decreases firstly and then increases. The reason for the better performance using 1.5 MPa inflation pressure is that there is less cracks on the ice layer and the ice layer near the sample sides will be dragged off by the middle shed ice layer. When the inflation pressure is 2 MPa, more cracks appears, which makes it impossible to pull the ice off near the sample sides. With the inflation pressure further rises, the increase of transverse shear stress contributes more to the improvement of de-icing ratio. (3) The increase of ice thickness could reduce the surface deformation displacement and increase the de-icing ratio under low inflation pressure. This indicates that the new structured pneumatic impulse de-icing method has better de-icing effects by increasing the ice thickness during de-icing operation properly.
于周, 舒立春, 胡琴, 蒋兴良, 雷正飞. 覆冰厚度对气动脉冲除冰效果影响的数值仿真与试验验证[J]. 电工技术学报, 0, (): 121-121.
Yu Zhou, Shu Lichun, Hu Qin, Jiang Xingliang, Lei Zhengfei. Numerical Simulation and Experimental Verification of the Influences of Icing Thicknesses on Pneumatic Impulse De-Icing Effects. Transactions of China Electrotechnical Society, 0, (): 121-121.
[1] 陆秋瑜, 马千里, 魏韡, 等. 基于置信容量的风场配套储能容量优化配置[J]. 电工技术学报, 2022, 37(23): 5901-5910. Lu Qiuyu, Ma Qianli, Wei Wei, et al.Optimal configuration of energy storage parameters based on confidence capacity of wind farms[J]. Transactions of China Electrotechnical Society, 2022, 37(23): 5901-5910. [2] 沈小军, 聂聪颖, 吕洪. 计及电热特性的离网型风电制氢碱性电解槽阵列优化控制策略[J]. 电工技术学报, 2021, 36(3): 463-472. Shen Xiaojun, Nie Congying, Lü Hong.Coordination control strategy of wind power-hydrogen alkaline electrolyzer bank considering electrothermal characteristics[J]. Transactions of China Electrotechnical Society, 2021, 36(3): 463-472. [3] 程明, 许利通, 曹政, 等. 级联式无刷双馈电机的矢量控制系统和功率流研究[J]. 电工技术学报, 2022, 37(20): 5164-5174. Cheng Ming, Xu Litong, Cao Zheng, et al.Study on vector control system and power flow of cascaded brushless doubly-fed induction generator[J]. Transactions of China Electrotechnical Society, 2022, 37(20): 5164-5174. [4] 朱东海, 邹旭东, 胡家兵, 等. 双馈风电机组无撬棒故障穿越技术研究综述[J]. 电工技术学报, 2022, 37(19): 4895-4910. Zhu Donghai, Zou Xudong, Hu Jiabing, et al.Review of crowbarless fault ride through technology for doubly-fed induction generator-based wind turbines[J]. Transactions of China Electrotechnical Society, 2022, 37(19): 4895-4910. [5] 王晨, 寇鹏, 王若谷, 等. 利用多空间尺度下时空相关性的点云分布多风机风速预测[J]. 电力系统自动化, 2021, 45(22): 65-73. Wang Chen, Kou Peng, Wang Ruogu, et al.Wind speed forecasting for multiple wind turbines with point cloud distribution using spatio-temporal correlation on multiple spatial scale[J]. Automation of Electric Power Systems, 2021, 45(22): 65-73. [6] Fortin G, Perron J, Ilinca A.Behaviour and modeling of cup anemometers under icing conditions[C]//International Workshop on Atmospheric Icing of Structure XI, Canada, Montreal, 2005: 1-6. [7] Madi E, Pope K, Huang Weimin, et al.A review of integrating ice detection and mitigation for wind turbine blades[J]. Renewable and Sustainable Energy Reviews, 2019, 103: 269-281. [8] 胡琴, 王欢, 邱刚, 等. 风力发电机叶片覆冰量化分析及其应用[J]. 电工技术学报, 2022, 37(21): 5607-5616. Hu Qin, Wang Huan, Qiu Gang, et al.Quantitative analysis of wind turbine blade icing and its application[J]. Transactions of China Electrotechnical Society, 2022, 37(21): 5607-5616. [9] Wei Kexiang, Yang Yue, Zuo Hongyan, et al.A review on ice detection technology and ice elimination technology for wind turbine[J]. Wind Energy, 2020, 23(3): 433-457. [10] Parent O, Ilinca A.Anti-icing and de-icing techniques for wind turbines: critical review[J]. Cold Regions Science and Technology, 2011, 65(1): 88-96. [11] Palacios J, Wolfe D, Bailey M, et al.Ice testing of a centrifugally powered pneumatic deicing system for helicopter rotor blades[J]. Journal of the American Helicopter Society, 2015, 60(3): 1-12. [12] Weisend N A.Design of an advanced pneumatic deicer for the composite rotor blade[J]. Journal of Aircraft, 1989, 26(10): 947-950. [13] 马健钧. 海冰弯曲破坏的数值模拟方法研究[D]. 天津: 天津大学, 2013. [14] 李群, 欧卓成, 陈宜亨. 高等断裂力学[M]. 北京: 科学出版社, 2017. [15] 杨新辉. 脆性/韧性断裂机理与判据及裂尖变形理论研究[D]. 大连: 大连理工大学, 2005. [16] 蒋兴良, 舒立春, 孙才新. 电力系统污秽与覆冰绝缘[M]. 北京: 中国电力出版社, 2009. [17] Gupta V, Bergström J S.A progressive damage model for failure by shear faulting in polycrystalline ice under biaxial compression[J]. International Journal of Plasticity, 2002, 18(4): 507-530. [18] Dong W, Ding J, Zhou Z X.Experimental study on the ice freezing adhesive characteristics of metal surfaces[J]. Journal of Aircraft, 2014, 51(3): 719-726. [19] 梁健. 风力机叶片覆冰预测模型研究[D]. 重庆: 重庆大学, 2017. [20] 舒立春, 李瀚涛, 胡琴, 等. 自然环境叶片覆冰程度对风力机功率损失的影响[J]. 中国电机工程学报, 2018, 38(18): 5599-5605. Shu Lichun, Li Hantao, Hu Qin, et al.Effects of ice degree of blades on power losses of wind turbines at natural environments[J]. Proceedings of the CSEE, 2018, 38(18): 5599-5605.
