Abstract：Due to high speed, heavy load or other poor working conditions, the gear is often prone to tooth crack, surface damage, or even the tooth broken. As an important component of transmission mechanism, the fault of gear has a great impact on the safe operation of the entire system. Therefore, it is necessary to monitor the gear condition and diagnosis of the gear fault. Compared with the traditional vibration method and noise method, the gear fault diagnosis based on the motor drive system needs no additional sensors, becoming the latest research hotspot. For the frequent acceleration and deceleration in practical conditions such as servo system, this paper presents a new gear fault diagnostic method in spatial domain. A cascaded observer was designed firstly that can obtain the kinematic error of the gear transmission system without sensors on the load-side. Then using the spatial domain resampling technique, the fault daignosis no longer depended on the speed operating condition. Furthermore, the signal to noise ratio (SNR) of gear fault was effectively improved with the spatial domain synchronous averaging method. Finally, the algorithm was validated on the gear tooth-broken fault diagnosis platform. The results show that this method can implement the gear fault diagnosis in a large range of variable speed situation.
杨明, 柴娜, 李广, 徐殿国. 基于位域运动误差观测器的齿轮断齿故障诊断[J]. 电工技术学报, 2018, 33(6): 1285-1292.
Yang Ming, Chai Na, Li Guang, Xu Dianguo. Diagnosis of the Gear Tooth-Broken Fault Based on the Kinematic Error Observer in Spatial Domain. Transactions of China Electrotechnical Society, 2018, 33(6): 1285-1292.
[1] 杨明, 董传洋, 徐殿国. 基于电机驱动系统的齿轮故障诊断方法综述[J]. 电工技术学报, 2016, 31(4): 58-63. Yang Ming, Dong Chuanyang, Xu Dianguo.Review of gear fault diagnosis methods based on motor drive system[J]. Transactions of China Electrotechnical Society, 2016, 31(4): 58-63. [2] 杭俊, 张建忠, 程明, 等. 风力发电系统状态监测和故障诊断技术综述(英文)[J]. 电工技术学报, 2013, 28(4): 261-271. Hang Jun, Zhang Jianzhong, Cheng Ming, et al.An overview of condition monitoring and fault diagnostic for wind energy conversion system[J]. Transactions of China Electrotechnical Society, 2013, 28(4): 261-271. [3] Benbouzid M E H. A review of induction motors signature analysis as a medium for faults detection[J]. IEEE Transactions on Industrial Electronics, 2000, 47(5): 984-993. [4] 赵妍, 李志民, 李天云. 一种基于谱峭度的异步电机故障诊断方法[J]. 电工技术学报, 2014, 29(5): 189-196. Zhao Yan, Li Zhimin, Li Yuntian.A method for fault diagnosis of induction motors based on spectral Kurtosis[J]. Transactions of China Electrotechnical Society, 2014, 29(5): 189-196. [5] 史丽萍, 汤家升, 王攀攀, 等. 采用最优小波树和改进BP神经网络的感应电动机定子故障诊断[J]. 电工技术学报, 2015, 30(24): 38-45. Shi Liping, Tang Jiasheng, Wang Panpan, et al.Stator fault diagnosis of induction motors using the optimal wavelet tree and improved BP neural network[J]. Transactions of China Electrotechnical Society, 2015, 30(24): 38-45. [6] Kia S H, Henao H, Capolino G A.A comparative study of acoustic, vibration and stator current signatures for gear tooth fault diagnosis[C]//International Conference on Electrical Machines (ICEM), Marseille, France, 2012: 1514-1519. [7] 陈峙, 王铁, 谷丰收, 等. 基于电动机电流信号双谱分析的齿轮传动故障诊断[J]. 机械工程学报, 2012, 48(21): 84-90. Chen Zhi, Wang Tie, Gu Fenghou, et al.Gear transmission fault diagnosis based on the bispectrum analysis of induction motor current signatures[J]. Journal of Mechanical Engineering, 2012, 48(21): 84-90. [8] 赵洪山, 胡庆春, 李志为. 基于统计过程控制的风机齿轮箱故障预测[J]. 电力系统保护与控制, 2012, 40(13): 67-73. Zhao Hongshan, Hu Qingchun, Li Zhiwei.Failure prediction of wind turbine gearbox based on statistical process control[J]. Power System Protection and Control, 2012, 40(13): 67-73. [9] Kar C, Mohanty A R.Monitoring gear vibrations through motor current signature analysis and wavelet transform[J]. Mechanical Systems and Signal Pro- cessing, 2006, 20(1): 158-187. [10] Mohanty A R, Kar C.Fault detection in a multistage gearbox by demodulation of motor current wave- form[J]. IEEE Transactions on Industrial Electronics, 2006, 53(4): 1285-1297. [11] He Q, Ren X, Jiang G, et al.A hybrid feature extraction methodology for gear pitting fault detection using motor stator current signal[J]. Insight- Non-Destructive Testing and Condition Monitoring, 2014, 56(56): 326-333. [12] Li Z, Wu Z, He Y, et al.Hidden Markov model-based fault diagnostics method in speed-up and speed-down process for rotating machinery[J]. Mechanical Systems and Signal Processing, 2005, 19(2): 329-339. [13] Heidari Bafroui H, Ohadi A.Application of wavelet energy and Shannon entropy for feature extraction in gearbox fault detection under varying speed con- ditions[J]. Neurocomputing, 2014, 133(8): 437-445. [14] Roy S K, Mohanty A R, Kumar C S.Amplitude demodulation of instantaneous angular speed for fault detection in multistage gearbox[J]. Vibration Engineering and Technology of Machinery, 2015, 4(5): 447-454. [15] Mishra C, Samantaray A K, Chakraborty G. Rolling element bearing defect diagnosis under variable speed operation through angle synchronous averaging of wavelet de-noised estimate[J]. Mechanical Systems and Signal Processing, 2016, 72-73: 206-222. [16] 李政, 胡广大, 崔家瑞. 永磁同步电机调速系统的积分型滑模变结构控制[J]. 中国电机工程学报, 2014, 34(3): 431-437. Li Zheng, Hu Guangda, Cui Jiarui.Sliding-mode variable structure control with integral action for permanent magnet synchronous motor[J]. Pro- ceedings of the CSEE, 2014, 34(3): 431-437. [17] 郑泽东, 李永东, 肖曦. 永磁同步电机负载转矩观测器[J]. 电工技术学报, 2010, 25(2): 30-36. Zheng Zedong, Li Yongdong, Xiao Xi.Load torque observer of permanent magnet synchronous motor[J]. Transactions of China Electrotechnical Society, 2010, 25(2): 30-36. [18] 毛永乐, 杨家强, 赵寿华. 带负载转矩估算的非线性观测器内嵌式永磁同步电机无位置传感器控制策略[J]. 中国电机工程学报, 2016, 36(8): 2252-2259. Mao Yongle, Yang Jiaqiang, Zhao Shouhua.Nonlinear observer with load-torque estimation for sensorless control strategy of interior permanent magnet synchronous motor[J]. Proceedings of the CSEE, 2016, 36(8): 2252-2259. [19] Wolf C M, Lorenz R D.Using the motor drive as a sensor to extract spatially dependent information for motion control applications[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1344-1351. [20] Huh K K, Lorenz R D, Nagel N J.Gear fault diagnostics integrated in the motion servo drive for electromechanical actuators[J]. IEEE Transactions on Industry Applications, 2012, 48(1): 142-150.
2018, Vol. 33 
