Dynamic Response Characteristics of Closed Crack with the High Frequency Eddy Current Loading
Liu Suzhen1, Zhuang Dongchao1, Shang Shibo2, Zhang Chuang1, Cai Zhichao1, Jin Liang3
1. Province-Ministry Joint Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability Hebei University of Technology Tianjin 300130 China; 2. Huazhong University of Science and Technology Wuhan 430074 China; 3. Key Laboratory of Advanced Electrical Engineering and Energy Technology Tianjin Polytechnic University Tianjin 300387 China
Abstract：The closed crack is one of early forms of the metal fatigue damage. Because of the close-knit contact of interfaces of closed cracks, the conventional electromagnetic ultrasonic transducer (EMAT) method is not ideal for detection. This paper presents a new technique for nonlinear Rayleigh surface wave measurements combined with EMAT, and the finite element simulation model is established that can describe the electromagnetic transduction process and closed crack's response process. The displacement distribution and the amplitude frequency characteristics of vibration particles are simulated in the process of EMAT surface wave transmission with high frequency eddy current loading. By virtue of the second harmonic component, the nonlinear propagation characteristics of EMAT surface wave in aluminum plate are analyzed, which can provide theoretic basis to apply electromagnetic loading technique to nonlinear ultrasonic detection of the closed cracks.
刘素贞, 庄东超, 商士博, 张闯, 蔡智超, 金亮. 高频涡流加载下闭合裂纹的动态响应特性[J]. 电工技术学报, 2015, 30(18): 246-253.
Liu Suzhen, Zhuang Dongchao, Shang Shibo, Zhang Chuang, Cai Zhichao, Jin Liang. Dynamic Response Characteristics of Closed Crack with the High Frequency Eddy Current Loading. Transactions of China Electrotechnical Society, 2015, 30(18): 246-253.
[1] Furuya Y, Torizuka S, Takeuchi E, et al. Ultrasonic fatigue testing on notched and smooth specimens of ultrafine-grained steel[J]. Materials & Design, 2012, 37(1): 515-520. [2] Patrik Broberg, Anna Runnemalm, Mikael Sjödahl. Improved corner detection by ultrasonic testing using phase analysis[J]. Ultrasonics, 2013, 53(2): 630-634. [3] Krishnan Balasubramaniam, Jitendra S Valluri, Raghu V Prakash. Creep damage characterization using a low amplitude nonlinear ultrasonic technique[J]. Materials Characterization, 2011, 62(3): 275-286. [4] Kumar A, Torbet C J, Pollock T M, et al. In situ characterization of fatigue damage evolution in a cast Al alloy via nonlinear ultrasonic measure- ments[J]. Acta Materialia, 2010, 58(6): 2143-2154. [5] Guo Xiasheng, Zhang Dong, Zhang Jie. Detection of fatigue-induced micro-cracks in a pipe by using time-reversed nonlinear guided waves: a three- dimensional model study[J]. Ultrasonics, 2012, 52(7): 912-919. [6] Hong Ming, Su Zhongqing, Wang Qiang, et al. Modeling nonlinearities of ultrasonic waves for fatigue damage characterization: theory, simulation, and experimental validation[J]. Ultrasonics, 2014, 54(3): 770-778. [7] Yoshikazu Ohara, Satoshi Horinouchi, Makoto Hashimoto, et al. Nonlinear ultrasonic imaging method for closed cracks using subtraction of responses at different external loads[J]. Ultrasonics, 2011, 51(6): 661-666. [8] Viswanath A, Rao B P C, Mahadevan S, et al. Micro- structural characterization of M250 grade maraging steel using nonlinear ultrasonic technique[J]. Journal of Materials Science, 2010, 45(24): 6719-6726. [9] Daniel T Zeitvogel, Kathryn H Matlack, Jin Yeon Kim. Characterization of stress corrosion cracking in carbon steel using nonlinear Tayleigh surface waves[J]. NDT&E International, 2014, 62(3): 144-152. [10] 焦敬品, 孙俊俊, 吴斌, 等. 结构微裂纹混频非线性超声检测方法研究[J]. 声学学报, 2013, 38(6): 648-656. Jiao Jingpin, Sun Junjun, Wu Bin, et al. A frequency- mixing nonlinear ultrasonic technique for micro- 11 crack detection[J]. Acta Acustica, 2013, 38(6): 648-656. [11] 周正干, 刘斯明. 非线性无损检测技术的研究、应用和发展[J]. 机械工程学报, 2011, 47(8): 2-11. Zhou Zhenggan, Liu Siming. Nonlinear ultrasonic techniques used in nondestructive testing: a review[J]. Journal of Mechanical Engineering, 2011, 47(8): 2-11. [12] 胡海峰. 板状金属结构健康监测的非线性超声理论与关键技术研究[D]. 长沙: 国防科学技术大学, 2011. [13] Riichi Murayama, Kazumi Ayaka. Evaluation of fatigue specimens using EMATs for nonlinear ultrasonic wave detection[J]. Journal of Nondestructive Evaluation, 2007, 26(2): 115-122. [14] Riichi Murayama, Kazuhiro Yamaguchi. Nonlinear ultrasonic wave detection by electromagnetic acoustic transducer (EMAT) for guided wave[J]. Japanese Journal of Applied Physics, 2005, 44(6): 4385-4388. [15] Yan D W, Brauce W, Drinkwater. Measurement of the ultrasonic nonlinearity of kissing bonds in adhesive joints[J]. NDT&E International, 2009, 42(5): 459-466. [16] Hong Ming, Su Zhongqing, Wang Qiang, et al. Modeling nonlinearities of ultrasonic waves for fatigue damage characterization: theory, simulation, and experimental validation[J]. Ultrasonics, 2014, 54(3): 770-778. [17] Ibragimov N H, Rudenko O V. Principle of an a priori use of symmetries in the theory of nonlinear waves[J]. Acoustical Physics, 2004, 50(4): 406-419. [18] Bart Sarens, Bert Verstraeten, Christ Glorieus, et al. Investigation of contact acoustic nonlinearity in delaminations by shearographic imaging, laser doppler vibrometric scanning and finite difference modeling[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2010, 57(6); 1383-1395.
2015, Vol. 30 
