Parameter Optimization of the Switched Reluctance Motor Based on the Inductance Model
Kuai Songyan1,2, Tang Ruizhi1, Ma Jinyang1, Li Xinghong1, Sun Wenbing1
1.School of Information and Electrical Engineering China University of Mining and Technology Xuzhou 221008 China; 2.Jiangsu Electrical Drive and Control Engineering Research Center Xuzhou 221116 China
Abstract:In view of the flux linkage estimation error through analysis,a method is proposed in order to calibrate the equivalent resistance (Req),which can revise the estimation error.In this paper,the inductance model of the SRM is built first.And then Req is calibrated through experiments.After that,in the SRM control system,the received data of the flux linkage from online testing is stored in the RAM of the controller.At last,the inductance parameter is calculated through data analysis.According to the experimental results,this method is proved to be simple,effective,and can realize high performance control of SRM.
蒯松岩, 汤锐智, 马金洋, 李兴红, 孙文兵. 基于电感模型的开关磁阻电机参数优化[J]. 电工技术学报, 2015, 30(7): 97-104.
Kuai Songyan, Tang Ruizhi, Ma Jinyang, Li Xinghong, Sun Wenbing. Parameter Optimization of the Switched Reluctance Motor Based on the Inductance Model. Transactions of China Electrotechnical Society, 2015, 30(7): 97-104.
[1] Shen Lei,Wu Jianhua,Yang Shiyou,et al.Fast flux linkage measurement for switched reluctance motors excluding rotor clamping devices and position sensors[J].Instrumentation and Measurement,2013,62(1):185-191. [2] Parreira B,Rafael S,Pires A J,et al.Obtaining the magnetic characteristics of an 8/6 switched reluctance machine:From FEM analysis to the experimental tests[J].Industrial Electronics,2005,52(6):1635-1643. [3] Yi Lingzhi,Peng Hanmei,Liu Xiang,et al.Research of Switched reluctance generator position sensorless based on anfis by using finite element analysis[C].Power and Energy Engineering Conference(APPEEC),Wuhan,2011,1-4. [4] Ding Wen,Yin Zhonggang,Liu Ling,et al.Magnetic circuit model and finite-element analysis of a modular switched reluctance machine with e-core stators and multi-layer common rotors[J]. Electric Power Applications,2014,8(8):296-309. [5] Zhang Peng,Cassani P A,Williamson S S.An accurate inductance profile measurement technique for switched reluctance machines[J].Industrial Electronics,2010,57(9):2972-2979. [6] Minh Dinh Bui,Hoffmann S,Schafer U.An accurate magnetic characteristics measurement method for switched reluctance machines[C].International Conference on Electrical Machines and Systems (ICEMS),Beijing,2011:1-6. [7] 曾辉,陈昊,徐阳,等.基于新型磁链检测方案的开关磁阻电机非线性建模[J].电工技术学报,2013,28(11):124-130. Zeng Hui,Chen Hao,Xu Yang,et al.Modeling of switched reluctance motor based on a novel flux linkage characteristic measurement method[J].Transactions of China Electrotechnical Society,2013,28(11):124-130. [8] Sheth N K,Rajagopal K R.Calculation of the flux-linkage characteristics of a switched reluctance motor by flux tube method[J].Magnetics Conference,2005,41(10):1775-1776. [9] Zhao S W,Cheung N C,Gan W C,et al.A novel flux linkage measurement method for linear switched reluctance motors[J].Instrumentation and Measurement,2009,58(10):3569-3575. [10]Lu Kaiyuan,Rasmussen P O,Ritchie A E.Investigation of flux-linkage profile measurement methods for switched-reluctance motors and permanent-magnet motors[J].Instrumentation and Measurement,2009,58(9):3191-3198. [11]薛梅,夏长亮,王慧敏,等.基于DSP的开关磁阻电机磁链特性检测与神经网络建模[J].电工技术学报,2011,26(2):68-73. Xue Mei,Xia Changliang,Wang Huimin,et al.Flux linkage characteristic measurement based on DSP and artificial neural network modeling for switched reluctance motor[J].Transactions of China Electrotechnical Society,2011,26(2):68-73. [12]朱曰莹,赵桂范,龚进峰,等.新型两相同步对称励磁模式开关磁阻电机及其转矩特性[J].电工技术学报,2014,29(3):143-149. Zhu Yueying,Zhao Guifan,Gong Jinfeng,et al.A novel symmetrical double-phase-excitation mode and torque performance analysis for switched reluctance motors[J].Transactions of China Electrotechnical Society,2014,29(3):143-149. [13]郭增慧.开关磁阻电机磁链特性间接检测与应用[D].南京:南京航空航天大学,2011. [14]Chi H P,Lin R L,Chen J F.Simplified flux-linkage model for switched-reluctance motors[J].IEE Proceedings Electric Power Applications,2005,152(3):577-583. [15]Misawa S,Miki I.A rotor position estimation using fourier series of phase inductance for switched reluctance motor[C]. International Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM),Pisa,2010:1259-1263.