Abstract：For pulse train(PT) controlled switching converter, when it operates in continuous conduction mode(CCM), the low-frequency oscillation will occur. The low-frequency oscillation makes the state and the transient performance of the converter worse. In order to eliminate the low-frequency oscillation phenomenon existed in traditional PT controlled switching converter operating in CCM, a valley current mode pulse train(VCM-PT) control technique of switching converters is proposed. When VCM-PT controlled flyback converter operates in CCM, the variation of the energy stored in the transformer is zero in a switching cycle. Thus the VCM-PT controlled CCM flyback converter can effectively inhibit the low-frequency oscillation. In this paper, the principle and control strategy of VCM-PT control are studied with flyback converter operating in CCM as an example. The output voltage ripple and the combination of control pulses in a pulse train repetition cycle are analyzed. The pulse train controller is designed. Simulation and experimental results verify the theoretical analysis and the feasibility of our controller design.
刘姝晗, 许建平, 沙金. 谷值电流型脉冲序列控制反激变换器分析[J]. 电工技术学报, 2014, 29(8): 119-127.
Liu Shuhan, Xu Jianping, Sha Jin. Valley Current Mode Pulse Train Control for Flyback Converters. Transactions of China Electrotechnical Society, 2014, 29(8): 119-127.
[1] Telefus M, Shteynberg A, Ferdowsi M. Pulse train control technique for flyback converter[J]. IEEE Transactions on Power Electronics, 2004, 19(3): 757-764. [2] Ferdowsi M, Emadi A. Pulse train, a novel digital control method, applied to a discontinuous conduction mode flyback converter[J]. IEEE Transactions on Power Electronics, 2005, 41(1): 1141-1146. [3] Ferdowsi M, Emadi A, Telefus M, et al. Suitability of pulse train control technique for BIFRED converter [J]. IEEE Transactions on Electronic System, 2005, 41(1): 181-189. [4] Ferdowsi M, Emadi A, Telefus M, et al. Pulse regulation control technique for flyback converter [J]. IEEE Transactions on Power Electronics, 2005, 20(4): 798-805. [5] Khaligh A, Emadi A. Modified pulse adjustment technique with variable states to control DC-DC converters operating in discontinuous conduction mode and driving constant power loads[C]. IEEE Conference on Industrial Electronics and Applications, 2006: 1-6. [6] Xu Jianping, Qin Ming. Multi pulse train control technique for buck converter in discontinuous conduc- tion mode[J]. IEEE Transactions on Power Electronics, 2010, 3(3): 391-399. [7] 秦明, 许建平, 牟清波. 脉冲序列Buck变换器的控制规律及特性[J]. 西南交通大学学报, 2009, 44(5): 660-666. Qin Ming, Xu Jianping, Mou Qingbo. Control laws and characters of pulse train controlled buck converters [J]. Journal of Southwest Jiaotong University, 2009, 44(5): 660-666. [8] 牟清波, 许建平, 秦明, 等. 脉冲序列控制反激变换器输出电压纹波和脉冲组合方式[J]. 电工技术学报, 2010, 25(9): 101-107. Mou Qingbo, Xu Jianping, Qin Ming, et al. The output voltage ripple and control pulse combination of pulse train controlled flyback converter[J]. Transactions of China Electrotechnical Society, 2010, 25(9): 101-107. [9] 秦明, 许建平, 高玉, 等. 基于电流基准的开关变换器脉冲序列控制方法[J]. 物理学报, 2011, 61(3): 1-9. Qin Ming, Xu Jianping, Gao Yu, et al. Current referenced pulse train technique applied to switching converter[J]. Acta Physica Since, 2011, 61(3): 1-9. [10] 马正华, 夏建锋, 包伯承, 等. 断续导电模式Buck变换器双脉冲跨周期调制技术[J]. 中国电机工程学报, 2013, 33(12): 24-31. Ma Zhenghua, Xia Jianfeng, Bao Bocheng, et al. Dual pulse skipping modulation technique for buck converter operating in discontinuous conduction mode[J]. Proceedings of the CSEE, 2013, 33(12): 24-31. [11] 许建平, 牟清波, 王金平, 等. 脉冲序列控制DCM Buck变换器输出电压纹波研究[J]. 电机与控制学报, 2010, 14(5): 1-6. Xu Jianping, Mou Qingbo, Wang Jinping, et al. Output voltage ripple of pulse train controlled DCM buck converter[J]. Electric Machines and Control, 2010, 14(5): 1-6. [12] 王金平, 许建平, 秦明, 等. 开关DC-DC变换器双频率脉冲序列调制技术[J]. 中国电机工程学报, 2010, 30(33): 1-8. Wang Jinping, Xu Jianping, Qin Ming, et al. Bi-frequency pulse train modulation technique for switching DC-DC converter[J]. Proceedings of the CSEE, 2010, 30(33): 1-8. [13] 刘雪山, 许建平, 秦明, 等. 电流型脉冲序列控制单电感双输出Buck变换器[J]. 电工技术学报, 2012, 27(1): 156-161. Liu Xueshen, Xu Jianping, Qin Ming, et al. Single- inductor dual-output buck converter with current mode pulse-train control[J]. Transactions of China Electrotechnical Society, 2012, 27(1): 156-161. [14] 王金平, 许建平, 周国华, 等. 脉冲序列控制CCM Buck变换器低频波动现象分析[J]. 物理学报, 2011, 60(4): 1-10. Wang Jinping, Xu Jianping, Zhou Guohua, et al. Analysis of low-frequency oscillation phenomenon in the pulse train controlled Buck converter[J]. Acta Physica Sinica, 2011, 60(4): 1-10.
2014, Vol. 29 
