Abstract：Because of the special circuit structure of the single-stage full-bridge power factor corrector, there is large output voltage ripple which is double industrial frequency. The output characteristic of the corrector has been influenced. As a conventional method, increasing the output capacitor could reduce the ripple, while the dynamic response is reduced. A novel output-voltage-ripple suppression scheme is proposed in the auxiliary winding single stage full-bridge PFC converter in this paper, which made output voltage ripple lower. Compared with the conventional method, the proposed scheme can solve the problem without influence the dynamic response. The input current of clamp capacitor and the output current of the auxiliary winding have been designed; the control circuit and the constrained conditions of the key parameters have been designed. As the theoretic and experimental proved, output voltage ripple is suppressed by this scheme and the key parameters is validity.
[1] Loh P C. Analysis of multiloop control strategies for LC/CL/LCL filtered voltage-source and current source inverters[J]. IEEE Transactions on Industry Applications, 2005, 41: 644-654. [2] Lee J J, Kwon J M, Kim E H, et al. Single-stage single-switch PFC flyback converter using a synchronous rectifier[J]. IEEE Transactions on Industrial Electronics, 2008, 55(3): 1352-1365. [3] 王慧贞, 张军达. 一种新型无桥Boost PFC电路[J].电工技术学报, 2010, 25(5): 109-115. [4] Lamar D G, Fernandez A, Arias M, et al. An unity power factor correction preregulator with fast dynamic response based on alow-cost microcontroller[J]. IEEE Transactions on Power Electronics, 2008, 23(2): 635-642. [5] 文毅, 赵清林, 邬伟扬. 并联型双耦合绕组反激式单级PFC变换器[J]. 电工技术学报, 2007, 12(22): 116-121. [6] Alonso J M, Della Costa M A, Ordiz C. Integrated buck-flyback converter as a high-power-factor off line power supply[J]. IEEE Transactions on Industrial Electronics, 2008, 55(3): 1090-1100. [7] Lin Weiming, Chen Heping, Huang Junlai. A high efficiency zero-voltage switching boost voltage doubler with low conduction losses[C]. 38th IEEE Power Electronics Specialists Conference, USA, 2007: 773-777. [8] Dah Chuan L D, Ho Ching I H, Velibor P．A single-stage AC/DC converter with high power factor regulated bus voltageand output voltage[J]. IEEE Transactions on Power Electronics, 2008, 23(1): 218-228. [9] Moschopoulos G, Jain P. Single-phase single-stage power factor corrected converter topologies[J]. IEEE Transactions on IndustrialElectronics, 2005, 52(1): 23-35. [10] Hang Lijun, Yao Wenxi, Lü Zhengyu, et al. Analysis of flux density bias and digital suppression strategy for single-stage power factor corrector converter[J]. IEEE Transactions on Industrial Electronics, 2008, 55(8): 3077-3087. [11] Watson R, Lee F C. A soft-switched full-bridge Boost converter employing an active-clamp circuit[C]. IEEE Power Electronics Specialists Conference, Maggiore, Italy, 1996. [12] 苏斌, 杭丽君, 杨滔等. 新型单级隔离型软开关功率因数变换器[J]. 中国电机工程学报, 2008, 28(3): 40-46. [13] W Michihiko Nagao. A novel one-stage forward-type power-factor-correction circuit[J]. IEEE Transactions on Power Electronics, 2000, 15(1): 103-110. [14] 王大庆, 贲洪奇, 孟涛. 基于钳位电路的新型单级PFC技术研究[J]. 电力自动化设备, 2010, 30(5): 53-56. [15] Wang Daqing, Ben Hongqi, Meng Tao. A novel three-phase power factor correction converter based on active clamp technique[C]. Proceedings of the 11th International Conference on Electrical Machines and Systems, Wuhan, China, 2008: 1896-1901. [16] 贲洪奇, 金祖敏. 一种新型零电流零电压开关功率因数校正全桥变换器[J]. 中国电机工程学报, 2004, 24(6): 162-166.
2013, Vol. 28 
