|
|
特种电机与异步电机专题
|
|
|
|
|
|
|
| Novel Switched Flux Permanent Magnet Machine Topologies |
| Z.Q. Zhu |
| University of Sheffield Sheffield S1 3JD UK |
[1] Rauch S E, Johnson L J. Design principles of flux-switching alternators[J]. AIEE Trans., 1955, 74III: 1261-1268.
[2] Dawson C, Bolton H R. Design of a class of wide-angle limited-rotation rotary actuators[J]. IEE Proc., 1979, 126(4): 345-350.
[3] Bolton H R, Shakweh Y. Performance prediction of Laws’s relay actuator[J]. IEE Proc., 1990, 137-B(1): 1-13.
[4] Pollock C, Wallace M. The flux-switching motor, a DC motor without magnets or brushes[C]. IEEE Industry Applications Society Annual Meeting, 1999: 1980-1987.
[5] Chai K S, Pollock C. Using genetic algorithms in design optimization of the flux switching motor[C]. Int. Conf. on Power Electronics, Machines and Drives, 2002: 540-545.
[6] Pollock C, Brackley M. Comparison of the acoustic noise of flux-switching and a switched reluctance drives[J]. IEEE Trans. Industry Applications, 2003, 39(3): 826-834.
[7] Pollock C, Pollock H, Barron R, et al. Flux switching motors for automotive applications[J]. IEEE Trans. Industry Applications, 2006, 42(5): 1177-1184.
[8] Pollock H, Pollock C, Walter R T, et al. Low cost, high power density, flux-switching machines and drives for power tools[C]. IEEE Industry Applications Society Annual Meeting, 2003: 1451-1457.
[9] Pollock C, Pollock H, Brackley M. Electronically controlled flux switching motors: a comparison with an induction motor driving an axial fan[C]. The 29th Annual Conference of the IEEE Industrial Electronics Society, 2003: 2465-2470.
[10] Ochije K N, Pollock C. Simulink model of controlled power factor flux switching generator system for embedded power generation[C]. IEEE Industry Applications Society Annual Meeting, 2005: 2657-2664.
[11] Ochjie K N, Pollock C. Design/performance of a flux switching generator system for variable speed applications[C]. IEEE Industry Applications Society Annual Meeting, 2005: 1567-1574.
[12] Ochije K N, Pollock C. Controlled series compensation of high speed brushless flux switching generators for direct drive variable speed application[C]. IEEE Electric Ship Technologies Symposium, 2007: 408-413.
[13] Yi C, Pollock C, Pollock H. A permanent magnet flux switching motor for low energy axial fans[C]. IEEE Industry Applications Society Annual Meeting, 2005: 2168-2175.
[14] Mailfert A, Kubler H, Zhou J. Hybrid stepping motors comparative experimental results[C]. Int. Conf. on Electrical Machines, 1987: 781-783.
[15] Hoang E, Ben Ahmed A H, Lucidarme J. Switching flux permanent magnet polyphased synchronous machines[C]. 7th European Conf. on Power Electronics and Applications, 1997: 903-908.
[16] Hoang E, Gabsi M, Lecrivain M. Influence of magnetic losses on maximum power limits of synchronous permanent magnet drives in flux- weakening mode[C]. IEEE Industry Applications Society Annual Conference, 2000: 299-303.
[17] Amara Y, Hoang E, Gabsi M, et al. Design and comparison of different flux-switch synchronous machines for an aircraft oil breather application[C]. The 2nd IEEE Int. Conf. on Signals, Systems, Decision and Information Technology, 2003: 1-7.
[18] Hoang E, Lecrivain M, Gabsi M. A new structure of a switching flux synchronous polyphased machine with hybrid excitation[C]. European Conf. Power Electronics and Applications, 2007: 1-8.
[19] Hoang E, Lecrivain M, Hlioui S, et al. Hybrid excitation permanent magnet synchronous machines optimally designed for hybrid and full electric vehicles[C]. Int Conf on Power Electronics (ICPE2011) – ECCE-Asia, 2011: TuD1-2.
[20] Hoang E, Lecrivain M, Gabsi M. 3-D thermal model of an hybrid excitation flux switching synchronous machine using a 2-D FE method software[C]. Int. Symposium Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010: 101-104.
[21] Hoang E, Hlioui S, Lecrivain M, et al. Experimental comparison of lamination material case of switching flux synchronous machine with hybrid excitation[C]. European Conf. Power Electronics and Applications, 2009: 1-7.
[22] Ojeda X, Li G J, Gabsi M. Fault diagnosis using vibration measurements of a flux-switching permanent magnet motor[C]. IEEE Int. Symp. Industrial Electronics, 2010: 2091-2096.
[23] Li G J, Ojeda J, Hoang E, et al. Thermal- electromagnetic analysis of a fault-tolerant dual-star flux-switching permanent magnet motor for critical applications[J]. IET Proc. Electric Power Applications, 2011, 5(6): 503-513.
[24] Li G J, Ojeda J, Hoang E, et al. Thermal– electromagnetic analysis for driving cycles of embedded flux-switching permanent-magnet motors[J]. IEEE Trans. Vehicular Technology, 2012, 61(1): 140-151.
[25] Zhu Z Q, Pang Y, Howe D, et al. Analysis of electromagnetic performance of flux-switching PM machines by nonlinear adaptive lumped parameter magnetic circuit model[J]. IEEE Trans. Magnetics, 2005, 41(11): 4277-4287.
[26] Zhu Z Q, Howe D. Electrical machines and drives for electric, hybrid, and fuel cell vehicles[J]. Proc. IEEE, 2007, 95(4): 746-765, .
[27] Zhu Z Q, Chen J T. Advanced flux-switching permanent magnet brushless machines[J]. IEEE Trans. Magnetics, 2010, 46(6): 1447-1453.
[28] Zhu Z Q, Pang Y, Hua W, et al. Investigation of end-effect in PM brushless machines having magnets in the stator[J]. J. Applied Physics, 2006, 99(8)08R319: 1-3.
[29] Chen Y, Chen Y S, Zhu Z Q, et al. Starting torque of single-phase flux-switching permanent magnet motors[J]. IEEE Trans. Magnetics, 2006, 42(10): 3416-3418.
[30] Pang Y, Zhu Z Q, Howe D, et al. Eddy current loss in the frame of a flux-switching permanent magnet motor[J]. IEEE Trans. Magnetics, 2006, 42(10): 3413-3415.
[31] Chen Y, Zhu Z Q, Howe D. Three-dimensional lumped parameter magnetic circuit model for analyzing single-phase flux-switching permanent magnet motor[J]. IEEE Trans. Industry Applications, 2008, 44(6): 1701-1710.
[32] Zhu Z Q, Chen J T, Howe D, et al. Analysis of a novel multi-tooth flux-switching permanent magnet brushless ac machines for high torque direct drives[J]. IEEE Trans. Magnetics, 2008, 44(11): 4313-4316.
[33] Chen J T, Zhu Z Q, Howe D. Stator and rotor pole combination and optimal design of multi-tooth flux-switching PM brushless AC machines[J]. IEEE Trans. Magnetics, 2008, 44(12): 4659-4667.
[34] Iwasaki S, Deodhar R, Liu Y, et al. Influence of PWM on the proximity loss in permanent magnet brushless AC machines[J]. IEEE Trans. Industry Applications, 2009, 45(4): 1359-1367.
[35] Thomas A S, Zhu Z Q, Jewell G W. Proximity losses study in a high speed flux switching permanent magnet machine[J]. IEEE Trans. Magnetics, 2009, 45(10): 4748-4751.
[36] Zhu Z Q, Thomas A S, Chen J T, et al. Cogging torque in flux-switching permanent magnet machines[J]. IEEE Trans. Magnetics, 2009, 45(10): 4708-4711.
[37] Thomas A S, Zhu Z Q, Owen R, et al. Multi-phase flux-switching permanent magnet brushless machine for aerospace applications[J]. IEEE Trans. Industry Applications, 2009, 45(6): 1971-1981.
[38] Owen R L, Zhu Z Q, Thomas A, et al. Alternate pole wound flux switching permanent magnet brushless AC machines[J]. IEEE Trans. Industry Applications, 2010, 46(2): 790-797.
[39] Owen R L, Zhu Z Q, Jewell G W. Novel hybrid- excited flux-switching permanent-magnet machines with iron bridges[J]. IEEE Trans. Magnetics, 2010, 46(6): 1726-1729.
[40] Chen J T, Zhu Z Q. Winding configurations and optimal stator and rotor pole combination of flux-switching PM brushless AC machines[J]. IEEE Trans. Energy Conversion, 2010, 25(2): 293-302.
[41] Chen J T, Zhu Z Q. Influence of rotor pole number on optimal parameters in flux-switching PM brushless AC machines by lumped parameter magnetic circuit model[J]. IEEE Trans. Industry Applications, 2010, 46(4): 1381-1388.
[42] Chen J T, Zhu Z Q. Comparison of all and alternate poles wound flux-switching PM machines having different stator and rotor pole numbers[J]. IEEE Trans. Industry Applications, 2010, 46(4): 1406-1415.
[43] Chen J T, Zhu Z Q, Iwasaki S, et al. A novel E-core flux-switching PM brushless AC machine for direct-drive applications[J]. IEEE Trans. Industry Applications, 2011, 47(3): 1273-1282.
[44] Chen J T, Zhu Z Q, Iwasaki S, et al. A novel hybrid excited switched-flux brushless AC machine for EV/HEV applications[J]. IEEE Trans. Vehicular Technology, 2011, 60(4): 1365-1373.
[45] Chen J T, Zhu Z Q, Iwasaki S, et al. Influence of slot opening on optimal stator and rotor pole combination and electromagnetic performance of flux-switching PM brushless AC machines[J]. IEEE Trans. Industry Applications, 2011, 47(4): 1681-1691.
[46] Min W, Chen J T, Zhu Z Q, et al. Optimization and comparison of novel E-core and C-core linear switched flux PM machines[J]. IEEE Trans. Magnetics, 2011, 47(8): 2134-2141.
[47] Thomas A S, Zhu Z Q, Jewell G W. Comparison of switched flux and surface mounted permanent magnet generators for high speed applications[J]. Proc. IET, Electrical Systems in Transportation, 2011, 1(3): 111-116.
[48] Thomas A S, Zhu Z Q, Jewell G W, et al. Flux-switching PM brushless machines with alternative stator and rotor pole combinations[J]. Journal of Asian Electric Vehicles, 2008, 6(1): 1103-1110.
[49] Chen J T, Zhu Z Q, Xia Z P. Coil connections and winding factors in flux-switching PM brushless AC machines[J]. COMPEL: Int. J. for Computation and Mathematics in Electrical and Electronic Engineering, 2011, 30(1): 84-97.
[50] Chen Y, Zhu Z Q, Howe D. Rotor eddy current loss in 1-phase high-speed permanent magnet brushless DC motor[C]. Proc. IEEE Industry Application Society Annual Meeting, 2007: 537-543.
[51] Pang Y, Zhu Z Q, Howe D, et al. Comparative study of flux-switching and interior permanent magnet machines[C]. Int. Conf. Electrical Machines and Systems(ICEMS2007), 2007: 757-762. CDROM, paper PM3-06.
[52] Zhu Z Q, Chen J T, Pang Y, et al. Modelling of end-effect on electromagnetic torque in flux- switching permanent magnet machine[C]. Int. Conf. Electrical Machines and Systems (ICEMS2007), 2007: 943-948. CDROM, paper PMP-36.
[53] Zhu Z Q, Pang Y, Chen J T, et al. Analysis and reduction of magnet eddy current loss in flux- switching permanent magnet machines[C]. IET, Power Electronics, Machines and Drives, 2008: 120-124.
[54] Pang Y, Zhu Z Q, Howe D, et al. Investigation of iron loss in flux-switching permanent magnet machines[C]. IET, Power Electronics, Machines and Drives, 2008: 460-464.
[55] Chen J T, Zhu Z Q, Howe D. A dual-lumped parameter magnetic circuit model accounting for the cross-coupling effect, with particular reference to flux-switching permanent magnet machines[C]. IET, Power Electronics, Machines and Drives, 2008: 111-115.
[56] Zhu Z Q, Pang Y, Chen J T, et al. Influence of design parameters on output torque of flux-switching permanent magnet machines[C]. Proc. IEEE Vehicle Power and Propulsion Conference(VPPC), 2008: 1-6. (Digest Book, p.83)
[57] Thomas A S, Zhu Z Q, Jewell G W, et al. New 3-phase flux-switching PM brushless machines with alternative stator and rotor pole combinations[C]. Proc. Int. Conf. Elec. Machines and Systems (ICEMS), 2008: 2986-2991.
[58] Zhu Z Q, Chen X, Chen J T, et al. Novel linear fault-tolerant flux-switching permanent-magnet machines[C]. Proc. Int. Conf. Elec. Machines and Systems (ICEMS), 2008, paper SMO-48.
[59] Owen R L, Zhu Z Q, Jewell G W. Hybrid excited flux-switching permanent magnet machines[C]. 13th European Conf. Power Electronics and Applications, 2009: 1-10.
[60] Chen J T, Zhu Z Q, Iwasaki S, et al. Low cost flux-switching brushless AC machines[C]. IEEE Vehicle Power and Propulsion Conf., 2010, paper RT6/95-13475.
[61] Chen J T, Zhu Z Q, Iwasaki S, et al. Losses and efficiency in alternate flux-switching permanent magnet machines[J]. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2012, 31(1): 54-70.
[62] Zhu Z Q, Liu X. Individual and global optimization of switched flux permanent magnet motors[J]. Journal of Int. Conf. on Electrical Machines and Systems, 2012, 1(1): 32-39.
[63] Owen R, Zhu Z Q, Wang J B, et al. Review of variable-flux permanent magnet machines[J]. Journal of Int. Conf. on Electrical Machines and Systems, 2012, 1(1): 23-31.
[64] Owen R, Zhu Z Q, Wang J B, et al. Mechanically adjusted variable-flux concept for switched-flux permanent-magnet machines[C]. Int. Conf. Electrical Machines and Systems(ICEMS 2011), 2011: 1-6.
[65] Liu H, Zhu Z Q, Mohamed E, et al. Flux-weakening control of PMSM having large winding inductance, accounting for resistive voltage drop and inverter nonlinearities[J]. IEEE Trans. Power Electronics, 2012, 27(2): 942 -952.
[66] Zhu Z Q, Azar Z. Torque-speed characteristics of switched flux permanent magnet machines[J]. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 31(1): 22-39.
[67] Wang J B, Wang W Y, Atallah K, et al. Design considerations for tubular flux-switching PM machines[J]. IEEE Trans. Magnetics, 2008, 44(11): 4026-4032.
[68] Wang J B, Wang W, R Clark, et al. A tubular flux-switching permanent magnet machine[J]. J. Applied Physics, 2008, 103(7): 07F105-07F105-3.
[69] Hua W, Cheng M, Zhu Z Q, et al. Comparison of electromagnetic performance of brushless machines having magnets in stator and rotor[J]. J. Applied Physics, 2008, 103(7): 07F124-07F124-3.
[70] Hua W, Cheng M, Zhu Z Q, et al. Analysis and optimization of back-EMF waveform of a novel flux-switching PM motor[J]. IEEE Trans. Energy Conversions, 2008, 23(3): 727-733.
[71] Hua W, Cheng M, Zhu Z Q, et al. Study on static characteristics of novel flux-switching doubly-salient PM machine[J]. Proc. Chinese Society of Electrical Engineering, 2006, 26(13): 129-134.
[72] Hua W, Cheng M, Zhu Z Q, et al. Study on static characteristics of 2-phase flux-switching doubly- salient PM machine[J]. Trans. China Electrotechnical Society, 2006, 21(6): 70-77.
[73] Hua W, Zhu Z Q, Cheng M, et al. Comparison of flux-switching and doubly-salient permanent magnet brushless machines[C]. Proc. 8th Int. Conf. Electrical Machines and Systems, 2005: 165-170.
[74] Hua W, Cheng M, Zhu Z Q, et al. Design of flux- switching permanent magnet machine considering the limitation of inverter and flux-weakening capability[C]. IEEE Industry Applications Society Annual Conf., 2006: 2403-2410.
[75] Hua W, Cheng M, Zhu Z Q, et al. Comparative study of 2-phase flux-switching and doubly-salient permanent magnet brushless machines[C]. Proc. Int. Conf. Elec. Machines(ICEM2006), 2006: 1-6.
[76] Yan J, Lin H, Huang Y, et al. Magnetic field analysis of a novel flux switching transverse flux permanent magnet wind generator with 3-D FEM[C]. Power Electronics Specialist Conf., 2009: 332-335.
[77] Cheng M, Hua W, Zhang J, et al. Overview of stator- permanent magnet brushless machines[J]. IEEE Trans. Industrial Electronics, 2011, 58(11): 5087-5101.
[78] Zhang J, Chen Z, Cheng M. Design and comparison of a novel stator interior permanent magnet generator for direct-drive wind turbines[J]. IET Proc. Renewable Power Generation, 2007, 1(4): 203-210.
[79] Zhang J, Cheng M, Chen Z. Investigation of a new stator interior PM machine[J]. IET Proc. Elect. Power Appl., 2008, 2(2): 77-87.
[80] Zhang J, Cheng M, Chen Z, et al. Comparison of stator-mounted permanent-magnet machines based on a general power equation[J]. IEEE Trans. Energy Conversion, 2009, 24(4): 826-834.
[81] Zhao W, Cheng M, Hua W, et al. Back-EMF harmonic analysis and fault-tolerant control of flux-switching permanent-magnet machine with redundancy[J]. IEEE Trans. Industrial Electronics, 2011, 58(5): 1926-1935.
[82] Zhao W, Cheng M, Hua W, et al. Post-fault operation of redundant flux-switching permanent-magnet motors using harmonic injected current[C]. Int. Conf. Electrical Machines and Systems, 2010: 868-872.
[83] Zhao W, Cheng M, Hua W, et al. Remedial operation of a fault-tolerant flux-switching permanent magnet motor for electric vehicle applications[C]. IEEE Vehicle Power and Propulsion Conf., 2010: 1-6.
[84] Zhao W, Cheng M, Chau K T, et al. A new modular flux-switching permanent-magnet machine using fault-tolerant teeth[C]. 14th Biennial IEEE Conf. Electromagnetic Field Computation, 2010: 1.
[85] Zhao W, Cheng M, Hua W, et al. A redundant flux-switching permanent magnet motor drive for fault-tolerant applications[C]. IEEE Vehicle Power and Propulsion Conference, 2008: 1-6.
[86] W Zhao, Cheng M, Hua W, et al. Modeling of flux-switching permanent magnet motor drives using transient field-circuit co-simulation method[C]. Int. Conf. Electrical Machines and Systems, 2008: 4044-4048.
[87] Hua W, Cheng M, Zhang G. A novel hybrid excitation flux-switching motor for hybrid vehicles[J]. IEEE Trans. Magnetics, 2009, 45(10): 4728-4731.
[88] Zhang G, Cheng M, Hua W, et al. Analysis of the oversaturated effect in hybrid excited flux-switching machines[J]. IEEE Trans. Magnetics, 2011, 47(10): 2827-2830.
[89] Zhang G, Cheng M, Hua W. Analysis of flux- switching permanent-magnet machine by nonlinear magnetic network model with bypass-bridges[C]. Int. Conf. Electrical Machines and Systems, 2010: 1787-1791.
[90] Dong G P, Cheng M, Hua W. Modeling of a novel hybrid-excited flux-switching machine drives for hybrid electrical vehicles[C]. Int. Conf. Electrical Machines and Systems, 2010: 839-843.
[91] Hua W, Cheng M, Lu W, et al. A new stator-flux orientation strategy for flux-switching permanent magnet motor based on current-hysteresis control[J]. Journal of Applied Physics, 2009, 105(7): 07F112- 07F112-3.
[92] Hua W, Cheng M, Jia H, et al. Comparative study of flux-switching and doubly-salient PM machines particularly on torque capability[C]. IEEE Industry Applications Society Annual Meeting, 2008: 1-8.
[93] Hua W, Cheng M. Cogging torque reduction of flux-switching permanent magnet machines without skewing[C]. Int. Conf. Electrical Machines and Systems, 2008: 3020-3025.
[94] Jia H, Cheng M, Hua W, et al. A new stator-flux orientation strategy for flux-switching permanent motor drive based on voltage space-vector[C]. Int. Conf. Electrical Machines and Systems, 2008: 3032-3036.
[95] Jia H, Cheng M, Hua W, et al. Investigation and implementation of control strategies for flux- switching permanent magnet motor drives[C]. IEEE Industry Applications Society Annual Meeting, 2008: 1-6.
[96] Jia H, Cheng M, Hua W, et al. Torque ripple suppression in flux-switching PM motor by harmonic current injection based on voltage space-vector modulation[J]. IEEE Trans. Magnetics, 2010, 46(6): 1527-1530.
[97] Jia H, Cheng M, Hua W, et al. Compensation of cogging torque for flux-switching permanent magnet motor based on current harmonics injection[C]. IEEE Int. Electric Machines and Drives Conf., 2009: 286-291.
[98] Hua W, Cheng M. Inductance characteristics of 3-phase flux-switching permanent magnet machine with doubly-salient structure[C]. IEEE Int. Power Electronics and Motion Control Conf., 2006: 1-5.
[99] Wang Y, Jin M J, Shen J X, et al. An outer-rotor flux-switching permanent magnet machine for traction applications[C]. IEEE Energy Conversion Congress and Exposition, 2010: 1723-1730.
[100] Fei W Z, Shen J X. Novel PM switching flux motors[C]. Proc. 41st Int. Universities Power Eng. Conf., 2006: 729-733.
[101] Fei W Z, Shen J X. Comparative study and optimal design of PM switching flux motors[C]. Proc. 41st Int. Universities Power Engineering Conf., 2006: 695-699.
[102] Fei W Z, Luk P C K, Shen J X, et al. Permanent- magnet flux-switching integrated starter generator with different rotor configurations for cogging torque and torque ripple mitigations[J]. IEEE Ind. Appli., 2011, 47(3): 1247-1256.
[103] Wang Y, Jin M J, Fei W Z, et al. Cogging torque reduction in permanent magnet flux-switching machines by rotor teeth axial pairing[J]. IET Proc. Electric Power Applications, 2010, 4(7): 500-506.
[104] Jin M J, Wang Y, Shen J X, et al. Cogging torque suppression in a permanentmagnet flux-switching integrated-starter-generator[J]. IET Proc. Electric Power Applications, 2010, 4(8): 647-656.
[105] Fei W, Luk P C K, Xia B, et al. Shen, “Permanent magnet flux switching integrated-starter-generator with different rotor configurations for cogging torque and torque ripple mitigations[C]. IEEE Energy Conversion Congress and Exposition, 2010: 1715-1722.
[106] Jin M J, C Wang F, Shen J X, et al. A modular permanent-magnet flux-switching linear machine with fault-tolerant capability[J]. IEEE Trans. Magnetics, 2009, 45(8): 3179-3186.
[107] Fei W, Luk P C K, Shen J X, et al. A novel outerrotor permanent-magnet flux-switching machine for urban electric vehicle propulsion[C]. Int. Conf. Power Electronics Systems and Applications, 2009: 1-6.
[108] Wang F, Shen J X, Wang Y, et al. A new method for reduction of detent force in permanent magnet flux-switching linear motors[J]. IEEE Trans. Magnetics, 2009, 45(6): 2843-2846.
[109] Wang Y, Huang Z W, Shen J X, et al. Comparison and study of 6/5- and 12/10-pole permanent magnet flux-switching motors considering flux-weakening capability[C]. Int. Conf. Electrical Machines and Systems, 2008: 3262-3265.
[110] Wang F, Shen J X, Wang L L, et al. A novel permanent magnet flux-switching linear motor[C]. 4th IET Conf. Power Electronics, Machines and Drives, 2008: 116-119.
[111] Fang Z X, Wang Y, Shen J X, et al. Design and analysis of a novel flux-switching permanent magnet integrated-starter-generator[C]. IET Conf. Power Electronics, Machines and Drives, 2008: 106-110.
[112] Wang K, Shen J X, Dong S Z. Sensorless control and initial position estimation of permanent magnet flux switching motor[C]. Int. Conf. Electrical Machines and Systems, 2007: 487-491.
[113] Huang L, Yu H, Hu M, et al. A novel flux-switching permanent-magnet linear generator for wave energy extraction application[J]. IEEE Trans. Magnetics, 2011, 47(5): 1034-1037.
[114] Zulu A, Mecrow B, Armstrong A. A wound-field three-phase flux-switching synchronous motor with all excitation sources on the stator[J]. IEEE Trans. Industry Applications, 2010, 46(6): 2363-2371.
[115] Zulu A, Mecrow B C, Armstrong M. Prediction of performance of a wound-field segmented-rotor flux- switching synchronous motor using a dq-equivalent model[C]. Int. Conf. on Electrical Machines, 2010: 1-6.
[116] Zulu A, Mecrow B C, Armstrong M. Topologies for wound-field three-phase segmented-rotor flux- switching machines[C]. IET Int. Conf. Power Electronics, Machines and Drives (PEMD 2010), 2010: 1-6.
[117] Raminosoa T, Gerada C, Galea M. Design considerations for a fault-tolerant flux-switching permanent-magnet machine[J]. IEEE Trans. Industrial Electronics, 2011, 58(7): 2818-2825.
[118] Raminosoa T, Gerada C. A comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for fault tolerant drive systems[C]. IEEE Energy Conversion Congress and Exposition, 2010: 2471-2478.
[119] Raminosoa T, Gerada C. Novel fault tolerant design of flux switching machines[C]. 5th IET Int. Conf. Power Electronics, Machines and Drives, 2010: 1-6.
[120] Raminosoa T, Gerada C. Fault tolerant winding technology comparison for flux switching machine[J]. Int. Conf. Electrical Machines, 2010: 6 pages.
[121] Chen A, Nilssen R, Nysveen A. Investigation of a three-phase flux-switching permanent magnet machine for downhole applications[C]. Int. Conf. Electrical Machines, 2010: 5 pages.
[122] Chen A, Nilssen R, Nysveen A. Analytical design of a high-torque flux-switching permanent magnet machine by a simplified lumped parameter magnetic circuit model[C]. Int. Conf. Electrical Machines, 2010: 6 pages.
[123] Chen A, Rotevatn N, Nilssen R, et al. Characteristic investigations of a new three-phase flux-switching permanent magnet machine by FEM simulations and experimental verification[C]. Int. Conf. Electrical Machines and Systems, 2009: 1-6.
[124] Ilhan E, Gysen B L J, Paulides J J H, et al. Analytical hybrid model for flux switching permanent magnet machines[J]. IEEE Trans. Magnetics, 2010, 46(6): 1762-1765.
[125] Gysen L J, Ilhan E, Meessen K J, et al. Modeling of flux switching permanent magnet machines with fourier analysis[J]. IEEE Trans. Magnetics, 2010, 46(6): 1499-1502.
[126] C J Krop, Encica L, Lomonova E A. Analysis of a novel double sided flux switching linear motor topology[C]. Int. Conf. Electrical Machines, 2010: 5 pages.
[127] Ilhan E, Paulides J, Encica L, et al. Tooth contour method implementation for the flux-switching PM machines[C]. Int. Conf. Electrical Machines, 2010: 6 pages.
[128] Sulaiman E, Kosaka T, Tsujimori Y, et al. Design of 12-slot 10-pole permanant magnet flux-switching machine with hybrid excitation for hybrid electric vehicle[C]. Int. Conf. Power Electronics, Machines and Drives, 2010: 1-5.
[129] Kayano S, Sanada M, Morimoto S, Power characteristics of a permanent magnet flux switching generator for a low-speed wind turbine[C]. Int. Power Electronics Conf., 2010: 258-263.
[130] K Lu, Rasmussen P O, Watkins S J, et al. A new low-cost hybrid switched reluctance motor for adjustable-speed pump applications[J]. IEEE Trans. Industry Applications, 2011, 47(1): 314-321.
[131] Bangura J F. Design of high-power density and relatively high-efficiency flux-switching motor[J]. IEEE Trans. Energy Conversion, 2006, 21(2): 416-425.
[132] Jung Ho L, Tae Hoon L, Seung Chul L. Optimum design criteria for maximum torque density and minimum torque ripple of flux switching motor using response surface methodology[C]. Int. Conf. Electrical Machines and Systems, 2010: 1848-1851.
[133] Xu W, Zhu J, Zhang Y, et al. Flux-switching permanent magnet machine drive system for plug-in hybrid electrical vehicle[C]. Australasian Universities Power Engineering Conf., 2010: 1-6.
[134] Sarlioglu B, Zhao Y F, Lipo T A. A novel doubly saliency single phase permanent magnet generator[C]. Proc. IEEE Industry Applications Society Annual Meeting, 1994: 9-15.
[135] Liao Y, Liang F, Lipo T A. A novel permanent magnet machine with doubly saliency structure[J]. IEEE Trans. Industry Applications, 1995, 3(5): 1069-1078.
[136] Deodhar R P, Andersson S, Boldea I, et al. The flux-reversal machine: a new brushless doubly-salient permanent-magnet machine[J]. IEEE Trans. Industry Applications, 1997, 33(4): 925-934.
[137] Wang C, Nasar S A, Boldea I. Three-phase flux reversal machine[J]. IEE Proc. -Electric Power Applications, 1999, 146(2): 139-146.
[138] Li Y, Lipo T A. A doubly salient permanent magnet motor capable of field weakening[C]. Proc. IEEE Power Electronics Specialists Conf., 1995: 565-571.
[139] Fan Y, Chau K T, Niu S. Development of a new brushless doubly fed doubly salient machine for wind power generation[J]. IEEE Trans. Magnetics, 2006, 42(10): 3455-3457.
[140] Chau K T, Cheng M, Chan C C. Nonlinear magnetic circuit analysis for a novel stator doubly fed doubly salient machine[J]. IEEE Trans. Magnetics, 2002, 38(5): 2382-2384.
[141] Zhang Z H, Zhang Z R, Qing H H. Structure and principle of hybrid excited electrical machines[M]. Beijing: Science Publisher, 2010.
[142] Amara Y, Vido L, Gabsi M, et al. Hybrid excitation synchronous machines: energy-efficient solution for vehicles propulsion[J]. IEEE Trans. Vehicular Technology, 2009, 58(8): 2137-2149.
[143] Kenjo T, Sugawara A. Stepping motors and their microprocessor controls[M]. Oxford: Clarendon Press, 1994.
[144] Hinds W E, Nocito B. The sawyer linear motor[C]. Proc. 3rd Annu. Symposium on Incremental Motion Control Systems and Devices, 1974: W1-10.
|
| [1] |
姚友素, 唐程雄, 王懿杰, 刘晓胜, 徐殿国. 基于正交磁场的无线能量和数据协同传输技术[J]. 电工技术学报, 2022, 37(8): 1875-1884. |
| [2] |
孙淑彬, 张波, 李建国, 疏许健, 荣超. 多负载磁耦合无线电能传输系统的拓扑发展和分析[J]. 电工技术学报, 2022, 37(8): 1885-1903. |
| [3] |
郝文美, 张立伟, 蔡娇, 杨瑞, 修三木. 基于输出能效最优的感应电能传输系统耦合线圈设计[J]. 电工技术学报, 2022, 37(8): 1904-1914. |
| [4] |
闫孝姮, 李政兴, 潘也, 陈伟华. 相同极性永磁体对感应式磁声磁粒子浓度成像过程影响的仿真[J]. 电工技术学报, 2022, 37(8): 1926-1937. |
| [5] |
田涵雷, 夏益文, 陈茂林, 梁国壮. 具有功率解耦能力的单级无桥式虚拟三端口整流器[J]. 电工技术学报, 2022, 37(8): 2006-2017. |
| [6] |
郭强, 周琛力, 李山. 面向电流源型PWM整流器直流侧电压的多环路控制策略[J]. 电工技术学报, 2022, 37(8): 2051-2063. |
| [7] |
陈亚千, 张炳义, 冯桂宏. 被动补偿式外转子永磁脉冲发电机放电特性[J]. 电工技术学报, 2022, 37(8): 1938-1947. |
| [8] |
丁文, 李可, 付海刚. 一种12/10极模块化定子混合励磁开关磁阻电机分析[J]. 电工技术学报, 2022, 37(8): 1948-1958. |
| [9] |
李科峰, 高山, 刘计龙, 肖飞, 麦志勤. 有源中点钳位五电平逆变器悬浮电容预充电控制策略[J]. 电工技术学报, 2022, 37(8): 2064-2075. |
| [10] |
易山, 卢子广, 袁凯南, 吴公平, 黄守道. 中低频轻载工况下引入虚拟电抗的感应电机变频调速系统稳定控制[J]. 电工技术学报, 2022, 37(8): 1959-1971. |
| [11] |
顾理成, 陈前, 赵文祥, 刘国海, 夏雨航. 五相永磁容错电机的相间短路容错控制[J]. 电工技术学报, 2022, 37(8): 1972-1981. |
| [12] |
孙凯, 贲洪奇, 孟涛, 赵志强, 丁明远. 一种具有宽输出调压范围与低电压应力的单级无桥隔离型PFC变换器[J]. 电工技术学报, 2022, 37(8): 1991-2005. |
| [13] |
周运红, 张爱民, 黄晶晶, 杜羽东, 张蕾. 基于动态事件触发的Vienna整流器模型预测控制[J]. 电工技术学报, 2022, 37(8): 2040-2050. |
| [14] |
黄珺, 付亚楠, 吕晓飞, 何许国, 霍鹏冲. 基于无功优化的三端口双向DC-DC变换器控制策略[J]. 电工技术学报, 2022, 37(8): 2086-2096. |
| [15] |
张康, 王丽梅. 考虑同步误差影响的直驱H型平台轮廓跟踪控制方法[J]. 电工技术学报, 2022, 37(8): 1982-1990. |
|
|
|
|
2012, Vol. 27 