Abstract：The magnetic transmission actuator realizes energy conversion through the non-contact magnetic coupling. It exhibits some distinct advantages, such as free contact mechanism, overload protection, high reliability, and low vibration. Therefore, the linear actuators adopt permanent magnet magnetic transmission technology, which combines high thrust force density and high reliability. This paper expounds the characteristics of the high force density permanent magnet linear actuators. Besides, several typical magnetic actuators are reviewed, and the concept of the high-performance magnetic screw and operation principle are introduced. In addition, the research work of domestic and abroad scholars in the field of magnetic screw is overviewed and summarized, and the key research issues, such as topology and manufacturing are analyzed. Moreover, some potentials applications of the magnetic screws are discussed, such as in aerospace and rail transit. Finally, the research trends are prospected.
凌志健, 赵文祥, 吉敬华. 高推力永磁直线作动器及其关键技术综述[J]. 电工技术学报, 2020, 35(5): 1022-1035.
Ling Zhijian, Zhao Wenxiang, Ji Jinghua. Overview of High Force Density Permanent Magnet Linear Actuator and Its Key Technology. Transactions of China Electrotechnical Society, 2020, 35(5): 1022-1035.
[1] Boldea I, Tutelea L, Xu W, Pucci M.Linear electric machines, drives, and MAGLEVs: an overview[J]. IEEE Transactions on Industrial Electronics, 2018, 66(9): 7504-7515. [2] Hochwallner M, Pinto L P G, Krus P, et al. Tracking control for high-performance motion of a hydraulic infinite linear actuator[J]. IEEE/ASME Transactions on Mechatronics, 2018, 23(6): 2782-2793. [3] Pan Donghua, Li Liyi, Wang Mingyi.Modeling and optimization of air-core monopole linear motor based on multi-physical fields[J]. IEEE Transactions on Industrial Electronics, 2018, 65(12): 9814-9824. [4] 汤文成, 徐楠楠. 滚珠丝杆副发展及研究现状[J]. 机械设计与机械制造, 2016, 45(4): 11-14. Tang Wencheng, Xu Nannan.Review on the research of ball screw[J]. Machine Design and Manufacturing Engineering, 2016, 45(4): 11-14. [5] Liu Yilun, Xu Lin, Zuo Lei.Design, modeling, lab, and field tests of a mechanical-motion-rectifier-based energy harvester using a ball-screw mechanism[J]. IEEE/ASME Transactions on Mechatronics, 2017, 22(5): 1933-1943. [6] Hanifzadegan M, Nagamune R.Tracking and structural vibration control of flexible ball-screw drives with dynamic variation[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(1): 133-142. [7] Zhu H, Fujimoto H.Mechanical deformation analysis and high-precision control for ball-screw-driven stages[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(2): 956-966. [8] Cao Ruiwu, Jin Yi, Lu Minghang, et al.Quantitative comparison of linear flux-switching permanent magnet motor with linear induction motor for electromagnetic launch system[J]. IEEE Transactions on Industrial Electronics, 2018, 65(9): 7569-7578. [9] Zhao Xing, Niu Shuangxia.Development of a novel transverse flux tubular linear machine with parallel and complementary PM magnetic circuit for precision industrial processing[J]. IEEE Transactions on Industrial Electronics, 2019, 66(6): 4945-4955. [10] Yoon J, Lang J, Trumper D.Fine-tooth iron-core linear synchronous motor for low acoustic noise application[J]. IEEE Transactions on Industrial Electronics, 2018, 65(12): 9895-9904. [11] Zeng Zhiqiang, Lu Qinfen.Investigation of novel partitioned-primary hybrid-excited flux-switching linear machines[J]. IEEE Transactions on Magnetics, 2018, 65(12): 9804-9813. [12] Zhao Wenxiang, Zhu Jian, Ji Jinghua, et al.Improvement of power factor in a double side linear flux-modulation permanent-magnet motor for long stroke applications[J]. IEEE Transactions on Industrial Electronics, 2019, 66(5): 3391-3400. [13] 张静, 余海涛, 施振川. 一种波浪发电装置用低速双动子永磁直线电机运行机理研究[J]. 电工技术学报, 2018, 33(19): 4553-4562. Zhang Jing, Yu Haitao, Shi Zhenchuan.Research on a tubular linear permanent magnet machines with dual translators for low speed wave energy conversion[J]. Transactions of China Electrotechnical Society, 2018, 33(19): 4553-4562. [14] Sheng Tiantian, Niu Shuangxia.Design and analysis of a novel modular linear double-stator biased flux machine[J]. IEEE Transactions on Magnetics, 2018, 54(11): 8108905. [15] Shi Chaojie, Qu Ronghai, Gao Yuting, et al.Design and analysis of an interior permanent magnet linear vernier machine[J]. IEEE Transactions on Magnetics, 2018, 54(11): 8106805. [16] Bianchi N, Bolognani S, Corte D D, et al.Tubular linear permanent magnet motors: an overall comparison[J]. IEEE Transactions on Industry Applications, 2003, 39(2): 466-475. [17] 许孝卓, 孙震, 汪旭东, 等. Halbach交替极永磁同步直线电机特性分析[J]. 电工技术学报, 2019, 34(9): 1825-1833. Xu Xiaozhuo, Sun Zhen, Wang Xudong, et al.Characteristic of a novel permanent magnet linear synchronous motor with Halbach array consequent pole[J]. Transactions of China Electrotechnical Society, 2019, 34(9): 1825-1833. [18] Zhao Wenxiang, Ma Anqi, Ji Jinghua, et al.Multi-objective optimization of a double-side linear vernier PM motor using response surface method and differential evolution[J]. IEEE Transactions on Industrial Electronics, 2020, 67(1): 80-90. [19] 秦伟, 范瑜, 徐洪泽, 等. 高温超导运动磁场电磁Halbach初级结构直线感应磁悬浮电机[J]. 电工技术学报, 2018, 33(23): 5427-5434. Qin Wei, Fan Yu, Xu Hongze, et al.A linear induction maglev motor with HTS traveling magnetic electromagnetic Halbach array[J]. Transactions of China Electrotechnical Society, 2018, 33(23): 5427-5434. [20] Shi Chaojie, Qu Ronghai, Kou Baoquan, et al.A novel HTS flux-reversal linear permanent magnet machine with a lower number of mover teeth and higher thrust density[J]. IEEE Transactions on Applied Superconductivity, 2018, 28(3): 0601505. [21] Ma Guangtong, Gong Tianyong, Zhang Han, et al.Experiment and simulation of REBCO conductor coils for an HTS linear synchronous motor[J]. IEEE Transactions on Applied Superconductivity, 2017, 27(4): 5201805. [22] Zhu Z Q.Overview of novel magnetically geared machines with partitioned stators[J]. IET Electric Power Applications, 2018, 12(5): 595-604. [23] 章跃进, 章君达. 偏心式谐波磁力齿轮气隙磁场分式线性变换解析模型[J]. 电工技术学报, 2018, 33(15): 3572-3577. Zhang Yuejin, Zhang Junda.Analytical model of magnetic field of eccentric harmonic magnetic gear using fractional linear transformation method[J]. Transactions of China Electrotechnical Society, 2018, 33(15): 3572-3577. [24] Johnson M, Gardner M, Toliyat H.A parameterized linear magnetic equivalent circuit for analysis and design of radial flux magnetic gears—part I: implementation[J]. IEEE Transactions on Energy Conversions, 2018, 33(2): 784-791. [25] Filippini M, Alotto P.Coaxial magnetic gears design and optimization[J]. IEEE Transactions on Industrial Electronics, 2017, 64(12): 9934-9942. [26] 付兴贺, 王标, 林明耀. 磁力齿轮发展综述[J]. 电工技术学报, 2016, 31(18): 1-12. Fu Xinghe, Wang Biao, Lin Mingyao.Overview and recent development of magnetic gears[J]. Transactions of China Electrotechnical Society, 2016, 31(18):1-12. [27] Zhu Z Q, Khatab M, Li H, et al.A novel axial flux magnetically geared machine for power split application[J]. IEEE Transactions on Industry Applications, 2018, 54(6): 5954-5966. [28] Atallah K, Calverley S, Howe D.Design, analysis and realization of a high-performance magnetic gear[J]. IET Electric Power Applications, 2004, 151(2): 135-143. [29] Cheng Ming, Han Peng, Hua Wei.General airgap field modulation theory for electrical machines[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8): 6063-6074. [30] Rasmussen P O, Andersen T O, Jorgensen F T, et al.Development of a high-performance magnetic gear[J]. IEEE Transactions on Industry Applications, 2005, 41(3): 764-770. [31] Rasmussen P O, Frandsen T V, Jensen K K, et al.Experimental evaluation of a motor-integrated permanent-magnet gear[J]. IEEE Transactions on Industry Applications, 2013, 49(2): 850-859. [32] Tian Ye, Liu Guohai, Zhao Wenxiang, et al.Design and analysis of coaxial magnetic gears considering rotor losses[J]. IEEE Transactions on Magnetics, 2015, 51(11): 8108304. [33] 李祥林, 程明, 邹国棠, 等. 聚磁式场调制永磁风力发电机工作原理与静态特性[J].电工技术学报, 2014, 29(11): 1-9. Li Xianglin, Cheng Ming, Chau K T, et al.Principle and analysis of a new flux-concentrating field-modulated permanent-magnet wind power generator[J]. Transactions of China Electrotechnical Society, 2014, 29(11): 1-9. [34] 张东, 邹国棠, 江建中, 等. 新型外转子磁齿轮复合电机的设计与研究[J]. 中国电机工程学报, 2008, 28(30): 67-72. Zhang Dong, Chau K T, Jiang Jianzhong, et al.Design and research of a novel magnetic-geared outer-rotor compact machine[J]. Proceedings of the CSEE, 2008, 28(30): 67-72. [35] Jian Linni, Deng Zhengxing, Shi Yujun, et al.The mechanism how coaxial magnetic gear transmits magnetic torques between its two rotors: detailed analysis of torque distribution on modulating ring[J]. IEEE/ASME Transactions on Mechatronics, 2019, 24(2): 763-773. [36] Jian L, Chau K T.A coaxial magnetic gear with Halbach permanent-magnet arrays[J]. IEEE Transactions on Energy Conversion, 2010, 25(2): 319-328. [37] Wang Mingqiao, Tong Chengde, Song Zhiyi, et al.Performance analysis of an axial magnetic-field-modulated brushless double-rotor machine for hybrid electric vehicles[J]. IEEE Transactions on Industrial Electronics, 2019, 66(1): 806-817. [38] Shen Jianxin, Li Huayang, Hao He, et al.A coaxial magnetic gear with consequent-pole rotors[J]. IEEE Transactions on Energy Conversion, 2017, 32(1): 267-275. [39] 刘晓, 赵云云, 黄守道, 等. 双磁场调制同轴磁齿轮瞬态和振动特性分析[J].电工技术学报, 2019, 34(9): 1865-1874. Liu Xiao, Zhao Yunyun, Huang Shoudao, et al.Investigation of the transient and vibration characteristics of a dual-flux-modulator coaxial magnetic gear[J]. Transactions of China Electrotechnical Society, 2019, 34(9): 1865-1874. [40] Atallah K, Wang J, Howe D. A high-performance linear magnetic gear[J]. Journal of Applied Physics, 2005, 97(10): 10N516. [41] Holehouse R, Atallah K, Wang J.Design and realization of a linear magnetic gear[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4171-4174. [42] Li Wenlong, Chau K T, Jiang J Z.Application of linear magnetic gears for Pseudo-direct-drive oceanic wave energy harvesting[J]. IEEE Transactions on Magnetics, 2011, 47(10): 2624-2627. [43] 包广清, 刘美钧. 一种新型永磁直线磁齿轮复合发电机的设计[J]. 电机与控制应用, 2016, 43(3): 8-15. Bao Guangqing, Liu Meijun.Design of a novel magnetic-geared tubular linear permanent magnet generator[J]. Electric Machines and Control, 2016, 43(3): 8-15. [44] Du Yi, Chau K T, Cheng Ming, et al.A linear magnetic-geared permanent magnet machine for wave energy generation[C]// International Conference on Electrical Machines and Systems (ICEMS), Incheon, South Korea, 2010: 1538-1541. [45] Ho Sie, Wang Qingsong, Niu Shuangxia, et al.A novel magnetic-geared tubular linear machine with Halbach permanent-magnet arrays for tidal energy conversion[J]. IEEE Transactions on Magnetics, 2015, 51(11): 8113604. [46] Liu C T, Hwang C C, Chiu Y W.Design of a coaxially magnetic-geared linear actuator for electric power steering system applications[J]. IEEE Transactions on Industry Applications, 2017, 53(3): 2401-2408. [47] Turner A, Ramsay K, Clark R, et al.Direct-drive rotary-linear electromechanical actuation system for control of gearshifts in automated transmissions[J]. IEEE Transactions on Magnetics, 2003, 39(5): 3007-3009. [48] 金平, 房淑华, 林鹤云. 基于磁场解析计算的直线旋转永磁作动器参数分析[J]. 中国电机工程学报, 2013, 33(18): 155-161. Jin Ping, Fang Shuhua, Lin Heyun.Parameter analysis of linear and rotary permanent magnet actuators based on analytically magnetic field computation[J]. Proceedings of the CSEE, 2013, 33(18): 155-161. [49] Guo Kaikai, Fang Shuhua, Lin Heyun, et al.3-D analytical analysis of magnetic field of flux reversal linear-rotary permanent magnet actuator[J]. IEEE Transactions on Magnetics, 2017, 53(6): 8202205. [50] 唐南君. 旋转-直线永磁执行器运行机理研究[D]. 哈尔滨: 哈尔滨工业大学, 2015. [51] Fujimoto Y, Suenaga T, Koyama M.Contril of an interior permanent-magnet screw motor with power-saving axial-gap displacement adjustment[J]. IEEE Transactions on Industrial Electronics, 2014, 61(7): 3610-3619. [52] Shukor A, Fujimoto Y.Direct-drive position control of a spiral motor as a monoarticular[J]. IEEE Transactions on Industrial Electronics, 2014, 61(2): 1063-1071. [53] Vitale N G, Hirschman G B, Smith W A.Optimization of drive screw pitch in a pulsatile ventricle assist device[C]//IEEE Annual Northeast Bioengineering Conference (NEBC), Storrs, USA, 2001: 37-38. [54] Wang Jiabin, Atallah K, Wang W.Analysis of a magnetic screw for high force density linear electromagnetic actuators[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4477-4480. [55] Holm R, Berg N, Rasmussen P O, et al.Design of a magnetic lead screw for wave energy conversion[J]. IEEE Transactions on Industry Applications, 2013, 49(6): 2699-2708. [56] Berg N, Holm R, Rasmussen P O.Theoretical and experimental loss and efficiency studies of a magnetic lead screw[J]. IEEE Transactions on Industry Applications, 2015, 51(2): 1438-1445. [57] Pakdelian S, Frank N, Toliyat H.Principles of the trans-rotary magnetic gear[J]. IEEE Transactions on Magnetics, 2013, 49(2): 883-889. [58] Gao Fang, Wang Qian, Zou Jibin, et al.Development of equivalent 2-D finite-element models for accurate prediction of thrust force in permanent magnet lead screws[J]. IEEE Transactions on Magnetics, 2017, 53(11): 8207004. [59] Pakdelian S, Deshpande Y, Toliyat H.Design of an electric machine integrated with trans-rotary magnetic gear[J]. IEEE Transactions on Energy Conversion, 2015, 30(3): 1180-1191. [60] Ji Jinghua, Ling Zhijian, WangJiabin, et al. Design and analysis of a Halbach magnetized magnetic screw for artificial heart[J]. IEEE Transactions on Magnetics, 2015, 51(11): 8108604. [61] 赵文祥, 凌志健, 吉敬华, 等. 一种磁场调制式磁力丝杠: 中国, CN 106341031 A[P].2017-01-18. [62] Ling Zhijian, Ji Jinghua, Wang Fangqun, et al.Design and analysis of a field modulated magnetic screw for artificial heart[J]. AIP Advances, 2017, 7: 056717. [63] Kouhshahi M, Kadel J, Bird J, et al.Designing and experimentally testing a magnetically geared lead screw[J]. IEEE Transactions on Industry Applications, 2018, 54(6): 5736-5747. [64] Cyusa C, Fujimoto Y.Enactment-based direct-drive test of a novel radial-gap helical RotLin machine[J]. IEEE Transactions on Industry Applications, 2018, 54(2): 1273-1282. [65] Lu Kaiyuan, Wu Weimin.Electromagnetic lead screw for potential wave energy application[J]. IEEE Transactions on Magnetics, 2014, 50(11): 8205004. [66] 高放. 永磁-感应子式磁力丝杠的电磁特性研究[D]. 哈尔滨: 哈尔滨工业大学, 2015. [67] Gao Fang, Wang Qian, Zou Jibin.Analytical modeling of 3-D magnetic field and performance in magnetic lead screws accounting for magnetization pattern[J]. IEEE Transactions on Industrial Electronics, 2019, DOI:10.1109/TIE.2019.2931241. [68] Ling Zhijian, Zhao Wenxiang, Ji Jinghua, et al.Design and analysis of a new HTS electromagnetic screw[J]. IEEE Transactions on Magnetics, 2017, 53(11): 8203904. [69] Pakdelian S, Frank N, Toliyat H.Magnetic design aspects of the trans-rotary magnetic gear[J]. IEEE Transactions on Energy Conversion, 2015, 30(1): 41-50. [70] Ling Zhijian, Zhao Wenxiang, Ji Jinghua, et al.Design of a new magnetic screw with discretized PMs[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(4): 0602805. [71] Jenney K, Pakdelian S.Design and fabrication of the trans-rotary magnetic gear using quasi-Halbach arrays[C]//IEEE Industrial Electronics Society, Washington, USA, 2018: 18382153. [72] Ling Zhijian, Ji Jinghua, Wang Jiabin, et al.Design optimization and test of a radially magnetized magnetic screw with discretized PMs[J]. IEEE Transactions on Industrial Electronics, 2018, 65(9): 7536-7547. [73] Mohamed H, Atallah K.Impulse magnetized magnetic screw[J]. IEEE Transactions on Magnetics, 2019, DOI: 10.1109/TMAG.2019.2890988. [74] Glehn G, Steentjes S, Hameyer K.Pulsed-field magnetometer measurements and pragmatic hysteresis modeling of rare-earth permanent magnets[J]. IEEE Transactions on Magnetics, 2018, 54(3): 2100404. [75] 鲁富强, 赵明静, 刘国征. 钕铁硼脉冲充磁过程的原理及参数变化分析[J]. 金属功能材料, 2017, 24(1): 32-34. Lu Fuqiang, Zhao Mingjing, Liu Guozheng.Principle and parameter change analysis of NdFeB pulse magnetization process[J]. Metallic Functional Materials, 2017, 24(1): 32-34. [76] Lu Kaiyuan, Xia Yongming, Wu Weimin, et al.New helical-shape magnetic pole design for magnetic lead screw enabling structure simplification[J]. IEEE Transactions on Magnetics, 2015, 51(11): 8204404. [77] Qiao K, Wu W, Sun Z, et al.Wave power generation system based on magnetic lead screw[C]//European Conference on Power Electronics and Applications, Riga, Latvia, 2018: 18229210.
2020, Vol. 35 
