Power Pulse Sequential Combination and Logical Combination in Power Electronics
Chen Kainan, Zhao Zhengming, Yuan Liqiang
State Key Lab of Control and Simulation Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing 100084 China
Abstract：This paper focuses on the basic theories of pulse combination in power electronics. The concept, method and realization of power pulse sequential combination and logical combination are summarized and analyzed. Aiming at the limitations of power pulse sequential combination, the power pulse (sequence) logical combination, as well as the methods and applications, is introduced. Both typical methods based on different pulse logical combination ideas, i.e. multilevel technology and frequency multiplication strategy, are effective in improving the performances of system. Thus, taken the power electronics amplifier as an analysis object, their harmonic characteristics and applicability are compared and contrasted. With the study of pulse combination methodology in power electronics, the relative technologies can be systematically understood, moreover, novel pulse combination and realization methods can be expanded. It is helpful to promote the development of power electronics.
[1] 白华. 电力电子变换器中电磁脉冲功率瞬态过程研究[D]. 北京: 清华大学, 2007. [2] 王立乔, 严江涛. 基于目标波形与逻辑组合的多电平变流器通用调制算法设计[J]. 电力系统自动化, 2013, 37(12): 87-91. Wang Liqiao, Yan Jiangtao. Design of general modulation algorithm of multilevel converter based on target waveform and logic combination[J]. Automation of Electric Power Systems, 2013, 37(12): 87-91. [3] Yu S H, Tseng M H. Optimal control of a nine-level class-D audio amplifier using sliding-mode quanti- zation[J]. IEEE Transactions on Industrial Electronics, 2011, 58(7): 3069-3076. [4] Zhang Y, Cai L, Meng Q D, et al. A high-efficiency cascade multilevel class-D amplifier with sliding mode control[C]//IEEE Conference on Robotics, Auto- mation and Mechatronics, Chengdu, 2008: 1212-1216. [5] Ertl H, Kolar J W, Zach F C. Analysis of a multilevel multicell switch-mode power amplifier employing the "flying-battery" concept[J]. IEEE Transactions on Industrial Electronics, 2002, 49(4): 816-823. [6] 汪世平. 倍频式IGBT高频感应加热电源的研究[D]. 杭州: 浙江大学, 2005. [7] Grahame H D, Lipo Thomas A. 电力电子变换器PWM技术原理与实践[M]. 北京: 人民邮电出版社, 2010. [8] Rodríguez J, Lai J S, Fang Z P. Multilevel inverters: a survey of topologies, controls, and applications[J]. IEEE Transactions on Industrial Electronics, 2002, 49(4): 724-738. [9] Cho I H, Cho K M, Kim J W, et al. A new phase-shifted full-bridge converter with maximum duty operation for server power system[J]. IEEE Transactions on Power Electronics, 2011, 26(12): 3491-3500. [10] 王铁军, 饶翔, 姜小弋, 等. 用于多重化逆变的移相变压器[J]. 电工技术学报, 2012, 27(6): 32-37. Wang Tiejun, Rao Xiang, Jiang Xiaoyi, et al. A phase-shift transformer applied in multi-module inverters[J]. Transactions of China Electrotechnical Society, 2012, 27(6): 32-37. [11] 文小玲, 尹项根. 大容量多重化逆变器的输出电压谐波分析[J]. 高电压技术, 2007, 33(10): 191-196. Wen Xiaoling, Yin Xianggen. Voltage harmonic analysis of the multi-pulse inverter with large capacity[J]. High Voltage Engineering, 2007, 33(10): 191-196. [12] Floriani J C A. Generalized analysis of current ripple in a pulsewidth modulation H-bridge converter with unipolar-bipolar switching[J]. IEEE Power Electronics Letters, 2004, 2(3): 83-86. [13] Agelidis V G, Calais M. Application specific harmonic performance evaluation of multicarrier PWM techniques[C]//29th Annual IEEE Power Electronics Specialists Conference, Fukuoka, Japan, 1998: 172-178.
2017, Vol. 32 
